Ghost traffic

Options
nacho
nacho Posts: 10 image  Freshman Member
First Comment Friend Collector Fifth Anniversary
in Security
Hello,
I cannot access a service/port when the firewall (security policy) is enabled, but the traffic goes through when it is disabled.
However, I cannot see the traffic entry in the logs so I can whitelist it and reenable my firewall.

Kindly advise

Model: USG1100

Accepted Solution

  • Zyxel_Kevin
    Zyxel_Kevin Posts: 975 image  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 100 Answers 500 Comments
    Answer ✓
    Hi @nacho,
    The asymmetric route led to the issue.
    Create a policy based route on the L3 device where under the firewall to ensure the return traffic through the firewall.
    The issue was resolved. Thanks your time.
    Kevin

All Replies

  • Zyxel_Kevin
    Zyxel_Kevin Posts: 975 image  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 100 Answers 500 Comments
    Hi @nacho, 
    Please check you don't have the rule such like Src:LAN DST:WAN ACT:Block
    And kindly provide your configuration via Private Message. 
    I'll check and give the advice. 
    Thank you

  • nacho
    nacho Posts: 10 image  Freshman Member
    First Comment Friend Collector Fifth Anniversary
    Okay i will send the configuration.
    Actually it is WAN to DMZ 
  • Zyxel_Kevin
    Zyxel_Kevin Posts: 975 image  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 100 Answers 500 Comments
    Hi @nacho, 
    I saw each WAN to DMZ rules have restricted destination IP.
    If only specific address cannot pass , please check you have the rule for the destination addresses.

    If the issue still we can have the remote session and please send your available time. 
    Thank you
    Kevin

  • nacho
    nacho Posts: 10 image  Freshman Member
    First Comment Friend Collector Fifth Anniversary
    Hi @Zyxel_Kevin
    We can do on Friday(04/11/2022) - 9am gmt+1
  • Zyxel_Kevin
    Zyxel_Kevin Posts: 975 image  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 100 Answers 500 Comments
    Hi @nacho, 
    Please provide remote information at that time. 
    Thank you

  • Zyxel_Kevin
    Zyxel_Kevin Posts: 975 image  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 100 Answers 500 Comments
    Answer ✓
    Hi @nacho,
    The asymmetric route led to the issue.
    Create a policy based route on the L3 device where under the firewall to ensure the return traffic through the firewall.
    The issue was resolved. Thanks your time.
    Kevin

Categories

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）