Switch POE down.

Hary1987
Hary1987 Posts: 13
First Comment Friend Collector
in Switch

 I am using ZyXEL Gs1920-24HP to supply power for the access point.
 However today, the switch cannot supply PoE, but connecting to the computer is OK. Does it mean the switch is failing or what should I check? When I adjust the PoE status, the below error appears: 
Error: set PoE Management Extend Configuration fail!

All Replies

  • Zyxel_Melen
    Zyxel_Melen Posts: 1,104
    Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate 100 Answers
     Zyxel Employee
    Hi @Hary1987,

    Could you help to collect Tech support for me to clarify your issue?
    Please go to Menu > Maintenance > tech support > All to collect and PM the tech support file to me.
    Thanks.


    Melen
  • Zyxel_Melen
    Zyxel_Melen Posts: 1,104
    Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate 100 Answers
     Zyxel Employee
    Hi @Hary1987,

    Could you inactive and activate the PoE function of your port and check if still get this error?
    Please go to Menu > Basic setting > PoE setup > PoE setup to inactive and activate.
    If still get this error, that means the PoE is malfunctioning. please contact your reseller for RMA.

    Melen
  • Hary1987
    Hary1987 Posts: 13
    First Comment Friend Collector
    Zyxel_Melen said:
    Hi @Hary1987,

    Could you inactive and activate the PoE function of your port and check if still get this error?
    Please go to Menu > Basic setting > PoE setup > PoE setup to inactive and activate.
    If still get this error, that means the PoE is malfunctioning. please contact your reseller for RMA.
    I checked all setting is OK, and PoE is active. I guess there is a problem with the hardware. I will get the log and send you soon
  • Zyxel_Melen
    Zyxel_Melen Posts: 1,104
    Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate 100 Answers
     Zyxel Employee
    Hi @Hary1987,

    Could you also connect your AP to other ports to check if all ports have the same problem or if the problem only occurs on some specific ports?
    And have you connected other PD to this port that also cannot be powered on?

    Melen
  • Hary1987
    Hary1987 Posts: 13
    First Comment Friend Collector
    I have just sent you my config, When I change anything, always that error appears. And no port has the power, I tested all ports.

  • Zyxel_Melen
    Zyxel_Melen Posts: 1,104
    Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate 100 Answers
     Zyxel Employee
    Hi @Hary1987,

    Based on your test result, the switch has a hardware issue since it could not provide power on any ports.  Please contact your reseller for the RMA process.

    Melen

Categories

Switch Help Center

  • FAQ
  • New & Release
  • Video Tutorials
    • EnglishTiếng ViệtРусскийไทย中文（台灣）