problems with HApro

Hello everyone, why can't HApro switch when you physically pull out the cable from the active zuvol, but writes this in the logs:

Tue Jan 24 08:25:49 2023 Enter Stand_By mode

Tue Jan 24 08:26:03 2023 Change to Active mode because timeout.

Tue Jan 24 08:26:15 2023 Change to Passive mode because Interface WAN_MAI_GE2 connection check fail. (fail count=1)

Tue Jan 24 08:26:48 2023 Exceed timeout. Device may be still in healthy state but under heavy workloads. Wait for internal timeout: 15.

Tue Jan 24 08:26:59 2023 Change to Active mode because exceeding internal timeout: 15.

Tue Jan 24 08:27:12 2023 Change to Passive mode because Interface WAN_MAI_GE3 connection check fail. (fail count=2)

Tue Jan 24 08:27:44 2023 Exceed timeout. Device may be still in healthy state but under heavy workloads. Wait for internal timeout: 15.

Tue Jan 24 08:27:55 2023 Change to Active mode because exceeding internal timeout: 15.

Tue Jan 24 08:28:08 2023 Change to Passive mode because Interface WAN_MAI_GE3 connection check fail. (fail count=3)

Tue Jan 24 08:28:40 2023 Exceed timeout. Device may be still in healthy state but under heavy workloads. Wait for internal timeout: 15.

Tue Jan 24 08:28:51 2023 Change to Active mode because exceeding internal timeout: 15.

Tue Jan 24 08:29:04 2023 Change to Passive mode because Interface WAN_MAI_GE2 connection check fail. (fail count=4)

Tue Jan 24 08:29:37 2023 Exceed timeout. Device may be still in healthy state but under heavy workloads. Wait for internal timeout: 15.

Tue Jan 24 08:29:47 2023 Change to Active mode because exceeding internal timeout: 15.

Tue Jan 24 08:30:00 2023 Change to Passive mode because Interface WAN_MAI_GE2 connection check fail. (fail count=5)

Tue Jan 24 08:30:33 2023 Exceed timeout. Device may be still in healthy state but under heavy workloads. Wait for internal timeout: 15.

Tue Jan 24 08:30:44 2023 Change to Active mode because exceeding internal timeout: 15.

All Replies

Security Highlight