Help! Need old firmware V3.30(AACV.4) for Zyxel USG 100-PLUS

Options
Alex_Khru
Alex_Khru Posts: 2
First Comment
edited March 2023 in Security

Hello!
After trying update my Zyxel USG 100-PLUS to firmware 330AACV7ITS-WK48-r74988.bin Its no booting. I can't find old version firmware, may be someone have this?

BootModule Version: V1.17 | 12/01/2011 05:20:17
DRAM: Size = 256 Mbytes

Kernel Version: V2.6.25.4 | 2014-01-21 10:47:34
ZLD Version: V3.30(AACV.4) | 2014-01-22 09:25:01

Press any key to enter debug mode within 1 seconds.
.....................

BM cmd line: console=ttyS0,115200 root=/dev/ram init=zyinit "-r /dev/sda", address: 0x100000

Uncompressing Linux...done.
Start to check file system...
/dev/sda2: 26/17352 files (0.0% non-contiguous), 43785/69296 blocks
/dev/sda3: 122/41120 files (13.9% non-contiguous), 14335/163841 blocks
Done
mount: wrong fs type, bad option, bad superblock on /dev/loop0,
missing codepage or other error
In some cases useful info is found in syslog - try
dmesg | tail or so

Kernel panic - not syncing: Attempted to kill init!

Accepted Solution

  • Zyxel_Emily
    Zyxel_Emily Posts: 1,296  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Answer ✓
    Options

    Hi @Alex_Khru,
    You can download firmware 3.30(AACV.4) at this link. Follow the firmware recovery step in the release note to upload firmware to USG 100-PLUS via FTP. If the device is still not able to boot up, maybe it is hardware issue. You can consider the new model USG FLEX 200 or ATP200.

All Replies

  • Zyxel_Emily
    Zyxel_Emily Posts: 1,296  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Answer ✓
    Options

    Hi @Alex_Khru,
    You can download firmware 3.30(AACV.4) at this link. Follow the firmware recovery step in the release note to upload firmware to USG 100-PLUS via FTP. If the device is still not able to boot up, maybe it is hardware issue. You can consider the new model USG FLEX 200 or ATP200.

  • Alex_Khru
    Alex_Khru Posts: 2
    First Comment
    Options

    Thank you! It turned out to restore via FTP.
    Please tell me what is the latest firmware version for USG 100-PLUS? I was able to find 330AACV8ITS-WK41

  • Zyxel_Emily
    Zyxel_Emily Posts: 1,296  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Options

    Hi @Alex_Khru,
    The latest firmware version of USG100-PLUS is 330AACV7ITS-WK48-r74988 which was released on 2016-12-02.
    330AACV8ITS-WK41-r74145 was released on 2016-10-14 and it is not the final version. Hence, we suggest you use 330AACV7ITS-WK48-r74988.

Categories

Security Highlight


Read more

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）