XGS3700 VLAN Configuration

benscha
benscha Posts: 1
edited August 2022 in Switch

i'm new witch Zyxel Switches VLAN Configuration and actually i cant configure the XGS3700 as it should be!

On Port 1 i like to have an VLAN Trunk port with my VLAN 10 and the default VLAN1 as an uplink to a Netgear Switch. how can i configure this? 

on Port 10-16 i like to have the following configuration:

VLAN 1 untagged
VLAN10 tagged

all the settings are named totally different from my netgear switches and i cant get it work! thx for any help.

All Replies

  • Zyxel_JonasTan
    Zyxel_JonasTan Posts: 94  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer

    Welcome to Zyxel Community!

    Regarding to the description, please follow the steps below to achieve your goal.

    1. Access XGS3700 via console.
    2. Input the following commands:
    VLAN 1:
        XGS3700#
        XGS3700# configure
        XGS3700(config)# vlan 1
        XGS3700(config-vlan)# no untagged 1-9,17-28
        XGS3700(config-vlan)# exit
        XGS3700(config)# exit
        XGS3700#

    VLAN 10:
        XGS3700#
        XGS3700# configure
        XGS3700(config)# vlan 10
        XGS3700(config-vlan)# fixed 1,10-16
        XGS3700(config-vlan)# exit
        XGS3700(config)# exit
        XGS3700#

    3. Save configuration command "write memory".
    4. Verify configuration:


    For more detailed information, please refer to this link to download the handbook chapter 2-1.

    Note: Configure PVID for end device that could not recognize VLAN tagged.

    Thanks for your support to Zyxel!
    Jonas

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）