ZON utility found my switch but I can get to the IP address
I just got a XGS1210-12 switch that I'm using to build a small, isolated lab network off of my PC. The network connection goes through a Benfei USB-C to Ethernet adapter.
The ZON utility came up and found it right away, but I can't open it in a web browser (launched from the utility or doing it manually) or ping it. It's currently using DHCP and giving me an IP of 192.168.1.3 but I've tried a static IP as well.
Any ideas why the utility can talk to the switch but I can't get to it any other way?
All Replies
-
Hi @eliljey,
Do you mean you cannot access or ping your switch?
This is more likely because your PC does not have an IP address, the IP address is using a different subnet with the switch, or there has an IP conflict. Please check your PC's IP address first.
The ZON Utility uses Layer 2 protocol to scan the switch. Therefore, you can get the device information within the above scenario.
Zyxel Melen
0 -
I had to change the IP addr of my USB network adapter and switch so they all played together and it works. Thanks for the tip!
0
Categories
- All Categories
- 397 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 81 Nebula Status and Incidents
- 5.1K Security
- 87 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 916 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 211 Service & License
- 337 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 2K FAQ
- 913 Nebula FAQ
- 421 Security FAQ
- 237 Switch FAQ
- 207 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 139 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 62 Security Highlight