AP-Firmware by NXC2500 / USG210
Hello,
I manage different WAC6103D-I access points either with a NXC2500 or with a USG210.
I see that the firmware for the WAC6103D-I is on the USG210 the latest version: V6.28(AAXH.0) than on the NXC2500: V6.25(AAXH.8)
So, when I connect an access point from one to another controller first it up- or downgrades always the firmware.
How can I have the newest AP firmware on the NXC2500?
Accepted Solution
-
Hi @FrankLauer ,
I would like to provide updated information. The most recent firmware version available for the WAC6103D-I on the NXC2500's AP firmware list is V6.25(AAXH.8). As per our plan, we may not be upgrading the NXC2500's AP firmware list any further.
If you wish to use V6.28(AAXH.0) for a WAC6103D-I managed by the NXC2500, you can do so by following these steps:
- Go to NXC2500 > Configuration > Wireless > AP Management > AP Policy > Firmware Updating > Updating Mode, and choose Manual,click Apply
2. Download the WAC6103D-I's V6.28(AAXH.0) firmware here and upgrade the firmware by FTP.
Judy
See how you've made an impact in Zyxel Community this year!
0
All Replies
-
Hi @FrankLauer ,
Please go to NXC2500 > Configuration > Wireless > AP Management > Firmware > Click Check and Apply to get the latest FW version for your WAC6103D-I.
Judy
See how you've made an impact in Zyxel Community this year!
0 -
Thank you for response. However the check I made already before. At the moment I have these results:
USG210:
V6.40 Patch 6 Success, 2023-04-18 17:51:06
FW for WAC6103D-I Local / V6.28(AAXH.0)
NXC2500:
V6.30 Patch 4-6.45 Patch 0 / Success, 2023-04-18 17:51:47
FW for WAC6103D-I Local / V6.25(AAXH.8)
Pressing the button "Apply" results in this message: "Runtime firmware and available firmware are the same version."
0 -
Hi @FrankLauer ,
I would like to provide updated information. The most recent firmware version available for the WAC6103D-I on the NXC2500's AP firmware list is V6.25(AAXH.8). As per our plan, we may not be upgrading the NXC2500's AP firmware list any further.
If you wish to use V6.28(AAXH.0) for a WAC6103D-I managed by the NXC2500, you can do so by following these steps:
- Go to NXC2500 > Configuration > Wireless > AP Management > AP Policy > Firmware Updating > Updating Mode, and choose Manual,click Apply
2. Download the WAC6103D-I's V6.28(AAXH.0) firmware here and upgrade the firmware by FTP.
Judy
See how you've made an impact in Zyxel Community this year!
0 -
Thanks, that worked for me.
And with a FTP client like FileZilla it also easy to upgrade a lot of APs in short time by FTP.
0
Categories
- All Categories
- 415 Beta Program
- 2.4K Nebula
- 147 Nebula Ideas
- 96 Nebula Status and Incidents
- 5.7K Security
- 262 USG FLEX H Series
- 271 Security Ideas
- 1.4K Switch
- 74 Switch Ideas
- 1.1K Wireless
- 40 Wireless Ideas
- 6.4K Consumer Product
- 249 Service & License
- 387 News and Release
- 84 Security Advisories
- 29 Education Center
- 10 [Campaign] Zyxel Network Detective
- 3.5K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 85 About Community
- 73 Security Highlight