Zyxel security advisory for DoS vulnerability of switches

Zyxel_May · January 2023

CVE: CVE-2022-4 3393

Summary

Zyxel has released patches for some switches affected by a denial-of-service (DoS) vulnerability. Users are advised to install them for optimal protection.

What is the vulnerability?

An improper check for unusual or exceptional conditions in the HTTP request processing function of some Zyxel switch versions could allow an attacker to corrupt the contents of the memory and result in a DoS condition on an affected device.

What versions are vulnerable—and what should you do?

After a thorough investigation, we’ve identified the vulnerable products that are within their vulnerability support period and released patches to address the vulnerability, as shown in the table below.

Since switches are mostly deployed in a local area network (LAN) environment, most potential DoS attacks can be reduced by firewalls or security gateways. Furthermore, for optimal protection, we suggest that users set more stringent management rules for remote access to their switches, such as by restricting HTTP or HTTPS requests to remotely access the device management interface or by limiting remote access by specific IP addresses.

Affected model	Affected version	Patch availability
GS1350-6HP	V4.70(ABPI.4)C0	V4.70(ABPI.5)C0
GS1350-12HP	V4.70(ABPJ.4)C0	V4.70(ABPJ.5)C0
GS1350-18HP	V4.70(ABPK.4)C0	V4.70(ABPK.5)C0
GS1350-26HP	V4.70(ABPL.4)C0	V4.70(ABPL.5)C0
GS1915-8	V4.70(ACAP.2)C0	V4.70(ACAP.3)C0
GS1915-8EP	V4.70(ACAQ.2)C0	V4.70(ACAQ.3)C0
GS1915-24E	V4.70(ACDR.2)C0	V4.70(ACDR.3)C0
GS1915-24EP	V4.70(ACDS.2)C0	V4.70(ACDS.3)C0
GS1920-8HPv2	V4.70(ABKZ.7)C0	V4.70(ABKZ.8)C0
GS1920-24v2	V4.70(ABMH.7)C0	V4.70(ABMH.8)C0
GS1920-48v2	V4.70(ABMJ.7)C0	V4.70(ABMJ.8)C0
GS1920-24HPv2	V4.70(ABMI.7)C0	V4.70(ABMI.8)C0
GS1920-48HPv2	V4.70(ABMK.7)C0	V4.70(ABMK.8)C0
GS2220-10	V4.70(ABRO.5)C0	V4.70(ABRO.6)C0
GS2220-28	V4.70(ABRQ.5)C0	V4.70(ABRQ.6)C0
GS2220-50	V4.70(ABRS.5)C0	V4.70(ABRS.6)C0
GS2220-10HP	V4.70(ABRP.5)C0	V4.70(ABRP.6)C0
GS2220-28HP	V4.70(ABRR.5)C0	V4.70(ABRR.6)C0
GS2220-50HP	V4.70(ABRT.5)C0	V4.70(ABRT.6)C0
XGS1930-28	V4.70(ABHT.3)C0	V4.70(ABHT.5)C0
XGS1930-28HP	V4.70(ABHS.3)C0	V4.70(ABHS.5)C0
XGS1930-52	V4.70(ABHU.3)C0	V4.70(ABHU.5)C0
XGS1930-52HP	V4.70(ABHV.3)C0	V4.70(ABHV.5)C0
XS1930-10	V4.70(ABQE.5)C0	V4.80(ABQE.0)C0
XS1930-12HP	V4.70(ABQF.5)C0	V4.80(ABQF.0)C0
XS1930-12F	V4.70(ABZV.5)C0	V4.80(ABZV.0)C0
XGS2210-28	V4.70(AAZJ.1)C0	V4.70(AAZJ.2)C0
XGS2210-52	V4.70(AAZK.1)C0	V4.70(AAZK.2)C0
XGS2210-28HP	V4.70(AAZL.1)C0	V4.70(AAZL.2)C0
XGS2210-52HP	V4.70(AAZM.1)C0	V4.70(AAZM.2)C0
XGS2220-30	V4.80(ABXN.0)C0	V4.80(ABXN.1)C0
XGS2220-30HP	V4.80(ABXO.0)C0	V4.80(ABXO.1)C0
XGS2220-30F	V4.80(ABYE.0)C0	V4.80(ABYE.1)C0
XGS2220-54	V4.80(ABXP.0)C0	V4.80(ABXP.1)C0
XGS2220-54HP	V4.80(ABXQ.0)C0	V4.80(ABXQ.1)C0
XGS2220-54FP	V4.80(ACCE.0)C0	V4.80(ACCE.1)C0
XGS4600-32	V4.70(ABBH.3)C0	V4.70(ABBH.4)C0
XGS4600-32F	V4.70(ABBI.3)C0	V4.70(ABBI.4)C0
XGS4600-52F	V4.70(ABIK.3)C0	V4.70(ABIK.4)C0
XMG1930-30	V4.70(ACAR.0)	V4.80(ACAR.0)
XMG1930-30HP	V4.70(ACAS.0)	V4.80(ACAS.0)
XS3800-28	V4.80(ABML.0)C0	V4.80(ABML.1)C0
MGS3500-24S	4.10(ABBR.1)C0	4.10(ABBR.2)C0*
MGS3520-28	4.10(AATN.4)C0	4.10(AATN.5)C0*
MGS3520-28	4.10(ABQM.1)C0	4.10(ABQM.2)C0*
MGS3520-28F	4.10(AATM.3)C0	4.10(AATM.4)C0*
MGS3530-28	4.10(ACEM.1)C0	4.10(ACEM.2)C0*
MGS3530-28	4.10(ACFJ.0)C0	4.10(ACFJ.1)C0*

*Please reach out to your local Zyxel support team for the file.

Got a question?

Please contact your local service rep or visit Zyxel’s Community for further information or assistance.

Acknowledgement

Thanks to Nikita Abramov from Positive Technologies for reporting the issue to us.

Revision history

2023-1-11: Initial release

Arif · July 2023

XGS2220-30hp switch is this Physically stack able?

Zyxel_Melen · July 2023

Hi @Arif,

Thanks for your interest in XGS2220 stacking.
It does provide the stacking function, but it needs firmware support that will be available in August.

Arif · July 2023

Hi Melen

Thanks for your confirmation, but we are Partner of zyxel networks.so we need urgent update firmware as early possible for project completion. Is it Possible ?

Zyxel_Melen · July 2023