No ping from Zywall IPSEC VPN Client

VPNSFIN · November 2018

Hello,

VPN tunnel established ok but no ping to server(192.168.15.205, firewall settings ok)
Client side dynamic ip
Server side 192.168.15.0 / 255.255.255.0

No visible vpn adapter in network adapters?

What to test / check?

BR
Andy

Image: https://us.v-cdn.net/6029482/uploads/editor/z9/457x54tw9nkx.jpg

Image: https://us.v-cdn.net/6029482/uploads/editor/74/jmtj04tor3qi.jpg

Image: https://us.v-cdn.net/6029482/uploads/editor/kl/7z3t1tlejfx3.jpg

Image: https://us.v-cdn.net/6029482/uploads/editor/v8/bvh1fvyslzqx.jpg

Zyxel_Emily · November 2018

Hi @VPNSFIN,

Use VPN100 with firmware 10.01(ABFV.1) to run the test and IPSec VPN client is able to ping local subnet of VPN100 successfully.

Topology:

(192.168.20.1)IPSec VPN client----Internet----(wan)VPN100(lan: 192.168.1.0/24)-----PC(192.168.1.34)

Once ZyWALL IPSec VPN client is installed on Windows, you'll find "TheGreenBow Virtual Miniport Adapter" in network adapter.

Please check if ZyWALL IPSec VPN client is installed successfully.

Can you share your configuration file of the VPN model with us in the private message?

VPN provisioning

In VPN connection on the VPN100, enable “Configuration Payload” and assign IP pool for IPSec VPN clients.

The tunnel is opened. IPSec VPN client gets IP 192.168.20.1 automatically. Ping PC 192.168.1.34 successfully.

No ping from Zywall IPSEC VPN Client

All Replies

Categories

Security Highlight

Security Help Center