GS1900-8 Vlan Sense Check.

Options
Ninja365
Ninja365 Posts: 7 image  Freshman Member
First Comment First Anniversary
in Switch

Hi all,

Just configured my switch for the first time and want to double check what i have done is correct. Bit different to the Netgear ones used in the past.

3 IP Ranges coming into and leaving switch on ports 1 & 8. Ports 2 to 7 all on default lan/vlan. Port 8 is currently carrying to a VLAN aware AP with 3 SSID's.

Port 1 - Default VLan, VLan10, VLAN11(Trunk Enabled)

Ports 2 - 7 Default VLAN

Port 8 - Default VLan, VLan10, VLAN11(Trunk Enabled)

Default VLAN - All Untagged

VLAN10 - Port 1 & 8 Tagged / All others Untagged.

VLAN11 - Port 1 & 8 Tagged / All others Untagged.

Anything glaringly wrong?, it all seems to work okay…….

Many thanks

Joe 😀

All Replies

  • Zyxel_Melen
    Zyxel_Melen Posts: 4,584 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate

    Hi @Ninja365,

    As you mentioned Ports 2 to 7 all on default lan/vlan, these ports should not be a member of VLAN 10 and 11.

    Please set Ports 2 to 7 as forbidden for VLAN 10 and 11, or the destination lookup failure (DLF) problem might have occurred in your network.

    Zyxel Melen


Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）