Can my GS1008HP hold all these devices?

TipoTimido
TipoTimido Posts: 17  Freshman Member
First Comment Friend Collector
edited November 2023 in Switch

Hello i have a GS1008HP switch.

Connected to him there were x3 ip cam 48v 13w max poe.

Now i want to connect to him x3 access point with 12v 13w max poe (i use x3 poe splitter from 48v to 12v for these).

Can the switch give all this power? or may it can't and goes to damage itselfe?

Accepted Solution

  • Zyxel_Nami
    Zyxel_Nami Posts: 656  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Engineer Level 1 - Security Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    Answer ✓

    Hello @TipoTimido

    Thank you for reaching out.

    The Zyxel GS1008HP switch provides a total PoE power budget of 60W, with a maximum of 30W per port.

    If each of your 6 devices (3 IP cameras and 3 access points) consumes the maximum 13W, this would total 78W (6 x 13W), which exceeds the switch's 60W PoE budget. In such cases, the switch might power off the powered devices. Therefore, it isn’t recommended to connect all 6 devices to a single GS1008HP.

    241015_Speak-up,-Win-WiFi-7_Community-CSO-signature_1920x200.jpg

    Share your feedback through our survey, make your voice heard, and win a WiFi 7 AP!

    https://bit.ly/2024_Survey_Community

    Nami

All Replies

  • TipoTimido
    TipoTimido Posts: 17  Freshman Member
    First Comment Friend Collector

    i read that the GS1008HP can erogate 30W per eth port.

    So i think that it can handle all those devices…

  • Zyxel_Nami
    Zyxel_Nami Posts: 656  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Engineer Level 1 - Security Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    Answer ✓

    Hello @TipoTimido

    Thank you for reaching out.

    The Zyxel GS1008HP switch provides a total PoE power budget of 60W, with a maximum of 30W per port.

    If each of your 6 devices (3 IP cameras and 3 access points) consumes the maximum 13W, this would total 78W (6 x 13W), which exceeds the switch's 60W PoE budget. In such cases, the switch might power off the powered devices. Therefore, it isn’t recommended to connect all 6 devices to a single GS1008HP.

    241015_Speak-up,-Win-WiFi-7_Community-CSO-signature_1920x200.jpg

    Share your feedback through our survey, make your voice heard, and win a WiFi 7 AP!

    https://bit.ly/2024_Survey_Community

    Nami

  • TipoTimido
    TipoTimido Posts: 17  Freshman Member
    First Comment Friend Collector
    edited November 2023
    https://community.zyxel.com/en/discussion/comment/58816#Comment_58816

    You right, thanks for explaination.

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）