SSL VPN with secuextender not working

LALU · January 2019

I have setup an SSL vpn on my USG40 following this tutorial.
https://support.zyxel.eu/hc/en-us/articles/360001390774-How-to-create-an-SSL-VPN-Tunnel-via-SecuExtender-software-

I can establish a connection with the Secu-extender, but I can't reach a device on my LAN1 network, even the SSL pool gateway 192.168.200.1.
If I check the assigned IP on TAP Adapter look strang3e...

Firmware V4.32(AALA.0) / 2018-07-12 17:13:23
Secure extender 4.0.3.0
SSL GATEWAY: 192.168.200.1
SSL POOL IP: 192.168.200.100 - 192.168.200.120
Remote network LAN1: 10.0.1.0/24

Image: https://us.v-cdn.net/6029482/uploads/editor/9f/us5i0drrefb9.jpg

Image: https://us.v-cdn.net/6029482/uploads/editor/0m/xv1n3r0xfcgy.png

Image: https://us.v-cdn.net/6029482/uploads/editor/0b/mhpv8o2q6ffp.png

jasailafan · January 2019

@LALU,

I got the same issue and found this FAQ.

Set subnet in "Assign IP Pool" and the issue is resolved.

https://businessforum.zyxel.com/discussion/2071/secuextender-4-0-3-0-for-windows-failed-to-access-zywalls-lan

LALU · January 2019

jasailafan said:

@LALU,

I got the same issue and found this FAQ.
Set subnet in "Assign IP Pool" and the issue is resolved.
https://businessforum.zyxel.com/discussion/2071/secuextender-4-0-3-0-for-windows-failed-to-access-zywalls-lan

Thank you !

jasailafan · January 2019

@LALU,

I got the same issue and found this FAQ.

Set subnet in "Assign IP Pool" and the issue is resolved.

https://businessforum.zyxel.com/discussion/2071/secuextender-4-0-3-0-for-windows-failed-to-access-zywalls-lan

LALU · January 2019

jasailafan said:

@LALU,

I got the same issue and found this FAQ.
Set subnet in "Assign IP Pool" and the issue is resolved.
https://businessforum.zyxel.com/discussion/2071/secuextender-4-0-3-0-for-windows-failed-to-access-zywalls-lan

Thank you !

SSL VPN with secuextender not working

Best Answers

All Replies

Categories

Security Help Center