[Resolved] SSL_VPN Tunnel not Assigned to Zone/Not generating Hits

Options
SI_Solutions
SI_Solutions Posts: 8 image  Freshman Member
First Comment First Anniversary
edited July 2024 in USG FLEX H Series

Type: USG FLEX 500H
FW: V.1.20(ABZH.1, 21.05.2024)

I created an SSL-VPN Tunnel, and was able to Set it up using the OpenVPN Client
But upon connecting i lost Internetconnection but was able to connect to the internal services

1.png

I noticed, that the Firewall Rules for the SSL_VPN werent generating any Hits.

2.png

I created an extra rule to see if i can ge the internet working if i leave the zone empty and use the VPN Subnet as a source, and it worked.

3.png

I cannot find where to change the assignment of the SSL-VPN-Tunnel to a zone. and if a check in the Zones there is an Object "ssl-tun" in the Zone, but in the Security Policy the same object is empty.

5.png 4.png

Anybody else had this experience?

All Replies

  • PeterUK
    PeterUK Posts: 4,305 image  Guru Member
    250 Answers 2500 Comments Friend Collector Eighth Anniversary
    edited May 2024

    Yes seeing the same

    well it was the case but seem to be working for me

    Screenshot 2024-05-30 183258.png
  • SI_Solutions
    SI_Solutions Posts: 8 image  Freshman Member
    First Comment First Anniversary

    Strange, your Interface is Called tun0, while mine is called ssl-tun.

  • PeterUK
    PeterUK Posts: 4,305 image  Guru Member
    250 Answers 2500 Comments Friend Collector Eighth Anniversary

    so is mine

    Screenshot 2024-06-03 112519.png
  • SI_Solutions
    SI_Solutions Posts: 8 image  Freshman Member
    First Comment First Anniversary

    With the current FIrmware 1.21(ABZH.0) the Object does not correctly show the ssl-tun and also the Firewall Rules now generate Hits.

    This issue has been resolved.

Categories

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）