XGS1210-12 V2: Compatible SFP10G-T Module

Tactice
Tactice Posts: 4
First Comment Friend Collector

Hello Zyxel Team,

I am considering to purchase XGS1210-12 V2 and looking also for a compatible SFP10G-T Module. For example MikroTik S+RJ10.

But in one older discussion a user report that XGS1210-12 is not compatible with XGS1210-12. I am wondering if this has been improved in V2 version?

Alternatively, a list of compatible SFP10G-T module would be apperciated.

Here a non-china manufacturer is preferred.

Thank you.

Accepted Solution

  • Zyxel_Judy
    Zyxel_Judy Posts: 1,637  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security Zyxel Certified Network Engineer Level 1 - Nebula
    Answer ✓

    Hi there,

    In case you still want to use the SFP10G-T, please refer to Zyxel SFP10G-T.

    Please note that SFP10G-T modules tend to generate more heat. Ensure you have a suitable method to maintain your switch at a normal temperature for proper operation.

    Judy

    See how you've made an impact in Zyxel Community this year! https://bit.ly/Your2024Moments_Community

All Replies

  • Zyxel_Judy
    Zyxel_Judy Posts: 1,637  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security Zyxel Certified Network Engineer Level 1 - Nebula

    Hi @Tactice ,

    SFP10G-T modules tend to generate more heat due to high power consumption, and the XGS1210-12 V2 has a fanless design. Therefore, we do not recommend using the SFP10G-T with the XGS1210-12 V2.

    For SFP10G usage, please refer to the recommendations below.

    Detailed information can be found in the datasheet.

    Judy

    See how you've made an impact in Zyxel Community this year! https://bit.ly/Your2024Moments_Community

  • Tactice
    Tactice Posts: 4
    First Comment Friend Collector

    Hello Judy,

    thank you for the answer.
    My target connection is a NAS with SFP10G-T interface. There it is no possible to use glas fiber or other interface. But the usage of the switch is in a low load and cooler inviroment.
    Which is the right SFP10G-T to use on with the XGS1210-12 V2?
    Greetings

    Toni

  • Zyxel_Judy
    Zyxel_Judy Posts: 1,637  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security Zyxel Certified Network Engineer Level 1 - Nebula
    Answer ✓

    Hi there,

    In case you still want to use the SFP10G-T, please refer to Zyxel SFP10G-T.

    Please note that SFP10G-T modules tend to generate more heat. Ensure you have a suitable method to maintain your switch at a normal temperature for proper operation.

    Judy

    See how you've made an impact in Zyxel Community this year! https://bit.ly/Your2024Moments_Community

  • Tactice
    Tactice Posts: 4
    First Comment Friend Collector

    Thank you.

  • Aaron_ML
    Aaron_ML Posts: 9
    First Answer First Comment Friend Collector First Anniversary

    Using cooling fins is one method I used to cool down the switch. It may be helpful for you guys.