GS2200-8 has PWR, SYS and ALM lights glowing
Hi there,
I got a GS2200-8 switch and when I try to plug it in, it just lights up the PWR, SYS and ALM lights and that's it. Ports aren't working, console doesn't show anything, so I am curious if there is any way of fixing this.
Thanks in advance!
All Replies
-
Please try to factory default your switch first. Here's a FAQ for you to reference:
Here's the file for factory default use.
0 -
Hi @Zyxel_Melen ,
I cannot factory reset the switch because when I connect my USB to Serial and connect via Tera Term with: 9600 Baud, 8bit Data, Parity: None, Stop Bits: 1bit, it doesn't show anything in console, no output whatsoever. I have tried to plug it in multiple times while connected to the console and still no output. Tested the USB to Serial cable on a different switch, and it works, so I don't understand what else is there to do or should I just give up on the switch.
Thank you.
0 -
Could you help to check will the tera term print any logs if you change the baud rate from 9600 to 115200?
0 -
Hi @Zyxel_Melen,
even switching from 9600 Baud to 115200 does nothing, Tera Term doesn't print anything. I have also tried switching to every baud rate they have, and nothing worked either.
0 -
Thanks for the update. This is more likely because your switch is malfunctioning on the hardware. Since the GS2200 has been end-of-life for many years, you can consider purchasing a new switch. GS2220 is the suggested migration product.
0
Categories
- All Categories
- 415 Beta Program
- 2.3K Nebula
- 141 Nebula Ideas
- 94 Nebula Status and Incidents
- 5.5K Security
- 216 USG FLEX H Series
- 262 Security Ideas
- 1.4K Switch
- 71 Switch Ideas
- 1K Wireless
- 39 Wireless Ideas
- 6.3K Consumer Product
- 243 Service & License
- 382 News and Release
- 81 Security Advisories
- 27 Education Center
- 8 [Campaign] Zyxel Network Detective
- 3K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 83 About Community
- 71 Security Highlight