USG LITE 60AX - VLAN assignment

Options
ColinSkuse
ColinSkuse Posts: 2 image  Freshman Member
First Comment
in Security

how do i allocate VLANS to port interfaces of the USG LITE 60AX?

Capture.PNG Capture2.PNG

Accepted Solution

  • Zyxel_Kay
    Zyxel_Kay Posts: 1,279 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - WLAN Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security
    Answer ✓

    Hi @ColinSkuse

    The USG LITE 60AX does not support direct VLAN assignment to individual port interfaces. However, you can achieve VLAN segmentation in your network by configuring an SSID with a VLAN and allowing devices to connect wirelessly.

    If you need to connect devices via Ethernet, we recommend using a managed switch that supports VLAN configuration. You can explore our range of switches here: https://www.zyxel.com/global/en/products/switch .

    Kay

All Replies

  • Zyxel_Kay
    Zyxel_Kay Posts: 1,279 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - WLAN Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security
    Answer ✓

    Hi @ColinSkuse

    The USG LITE 60AX does not support direct VLAN assignment to individual port interfaces. However, you can achieve VLAN segmentation in your network by configuring an SSID with a VLAN and allowing devices to connect wirelessly.

    If you need to connect devices via Ethernet, we recommend using a managed switch that supports VLAN configuration. You can explore our range of switches here: https://www.zyxel.com/global/en/products/switch .

    Kay

  • ColinSkuse
    ColinSkuse Posts: 2 image  Freshman Member
    First Comment

    Thanks, post your comment i worked out that all VLANs are allowed on every interface. I am working now with my existing managed switch

Categories

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）