use a specific wan port for a local ip address
Freshman Member
i have usg60 device which have wan1 connected to a 5g router(with ip 192.168.1.85 and wan2 connected to a fiber router (with ip 192.168.0.85). the network is connected to lan1 with ip 192.168.2.85.
in the configuration we have load balance and failover and a VPN L2TP-ipsec. the question is: how i can force a specific local ip address of the network (192.168.2.x) to connect to the internet only via wan2?
0
Accepted Solution
-
by routing rule
incoming LAN1
source IP
next hop WAN2
0
Guru Member
All Replies
-
by routing rule
incoming LAN1
source IP
next hop WAN2
0 -
solved, thanks everybody!
0
Categories
- All Categories
- 415 Beta Program
- 2.5K Nebula
- 155 Nebula Ideas
- 105 Nebula Status and Incidents
- 5.9K Security
- 320 USG FLEX H Series
- 286 Security Ideas
- 1.5K Switch
- 78 Switch Ideas
- 1.1K Wireless
- 42 Wireless Ideas
- 6.6K Consumer Product
- 256 Service & License
- 399 News and Release
- 86 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 3.8K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 87 About Community
- 78 Security Highlight
