How to exit from SSH session on GS1900-8HP?

zymat6816 · July 16

'exit' command does nothing.

logout, quit, … are not valid commands.

Switch revisions A1 and B1.

Latest firmware installed: V2.80(AAHI.0)C0

Zyxel_Melen · July 19

After investigation, we found the exit command was malfunctioning on this firmware version, that it should exit the SSH session. We will fix this in the future firmware release. You may follow this category to receive the new firmware release notification.

News and Release - Zyxel Community

Zyxel_Melen · November 7

Hi @Cristol,

The new firmware is released. You may check on this post:

Switch GS1900 Series - V2.90 Patch 0 Firmware Release — Zyxel Community

Zyxel_Melen · July 17

Hi @zymat6816,

The "exit" is used to exit the current mode only. Currently, GS1900 does not have a command to exit the SSH session. What SSH software did you use that needs a command to exit the SSH session?

zymat6816 · July 17

Hi.

I am using oxidized for configuration monitoring, works well for every other type of equipment that we have. It is based on Ruby.

https://github.com/ytti/oxidized

Zyxel_Melen · July 19

Hi @zymat6816,

After investigation, we found the exit command was malfunctioning on this firmware version, that it should exit the SSH session. We will fix this in the future firmware release. You may follow this category to receive the new firmware release notification.

News and Release - Zyxel Community

Cristol · October 24

Hi, i've installed last FW (2.80) released 08/24 and this issue isn't fix … Can you Fix for the next FW release ?

zymat6816 · October 25

On my GS1900-8HP // ZyXEL Ethernet Switch

firmware: V2.80(AAHI.0)_20240718

command 'exit' works.

Zyxel_Melen · October 25

Hi @Cristol,

We will fix it in the next firmware release. The current ERA is in the middle of November.

Zyxel_Melen · November 7

Hi @Cristol,

The new firmware is released. You may check on this post:

Switch GS1900 Series - V2.90 Patch 0 Firmware Release — Zyxel Community

zymat6816 · November 18

Hello,

seems that GS1920-8HP has a similar problem … exit command does not terminate the SSH session.

Current ZyNOS version : V4.80(ABKZ.1) | 07/08/2024

Zyxel_Melen · November 21

Hi @zymat6816,

I use your model and firmware version but cannot reproduce your issue. What SSH terminal software are you using? I tested with Tera Term.

zymat6816 · November 21

Hello,

my intention is to include GS1920-8HP in Oxidized configuration monitoring - which has a problem with it.

To test, I made a SSH session with Putty: after a succesfull login I typed 'exit' command which made the session "inactive", but did not close the window as it normally does. As soon as I typed any key (like space) I was back in session.

Then I also made a new session from another linux box; after 'exit' command it produced unusual message:

zyxel# exit
packet_write_wait: Connection to x.x.x.x port 22: Broken pipe <IP removed>

linux:~ $

How to exit from SSH session on GS1900-8HP?

Best Answers

All Replies

Categories

Switch Help Center