USG FLEX H Series - V1.30Patch 1 Firmware Release

Zyxel_Melen · November 14

Zywall USG FLEX H Series Release Note

November 2024

Firmware Version on all models

Please use the cloud firmware upgrade function to upgrade USG FLEX H Series

USG FLEX H Series	Firmware Version
FLEX100H	V1.30(ABXF.1)C0
FLEX100HP	V1.30(ACII.1)C0
FLEX200H	V1.30(ABWV.1)C0
FLEX200HP	V1.30(ABXE.1)C0
FLEX500H	V1.30(ABZH.1)C0
FLEX700H	V1.30(ABZI.1)C0

Note1: For the initial installation of the USG FLEX H Series firewall, please using the firmware wizard to upgrade to uOS 1.08 Patch 1 firmware first, and then proceed with the upgrade to uOS1.10 firmware. The device becomes unreachable if you upgrade USG FLEX H directly from the factory default version to 1.10 P1 or later firmware version directly.

Note 2: If you are using a date code firmware, please contact @Zyxel_Melen to get the firmware file and upgrade via local upload.

New Feature and Enhancements

N/A

Bug Fix

1. [Bug Fix][eITS#241001229, 241001349, 241001408, 241001709] Unable to upgrade the device from 1.21 to 1.30. It failed to apply configuration file and roll back to the original partition 1.21.

2. [Bug Fix][eITS#241001734] Upgrade firmware to 1.21 to 1.30 firmware the system will going as expected. But after reboot firewall manually, the configuration will become to system default.

3. [Bug Fix][eITS#241001817] Geo DB back to default signature after rebooted.

Please refer to the Download Link for more details.

Jeremlvt · November 19

Itruz · November 19

hi @Zyxel_Melen,

half of my site to site VPN drop connexion after the upgrade. it was the same issue after patch 0 on v1.30.

i have a usg flex 700h. this is not a problem on remote usg flex 200 device because Von work we'll between different remote device.

Did you change anything during the update ?

Edit : After recreating manually every VPN connexion from both side, everything look fine. Problably due to secondary remote IP adress removal on every gateway.