Problems with Version V1.30(ABXF.1) USG FLEX 100H

Pedroj
Pedroj Posts: 56  Ally Member
First Comment Sixth Anniversary
in USG FLEX H Series

Hello, after upgrading 2 USG FLEX 100H devices from version 1.20 to V1.30(ABXF.1) there are multiple problems.
1.- Performance-bandwidth problems (The client has 1G internet access on the WAN and we only have 100M from LAN to WAN
2.- Sessions and traffic are not shown in the logs or Dashboard
3.- Traffic cannot be seen in the logs.
4.- Traffic between WAN and LAN is slow.
This is a big problem for my client and I need to resolve it as soon as possible.
Thank you.

image.png
image.png

All Replies

  • Zyxel_Kay
    Zyxel_Kay Posts: 1,103  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - WLAN Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security
    edited November 21

    Hi @Pedroj

    To better understand and investigate the issues you're experiencing, it would be helpful if we could access your firewall remotely via the web GUI.

    You can follow the steps in this guide to enable HTTPS Web GUI access from the WAN:

    How to allow HTTPS Web GUI Access from WAN? (USG FLEX H) — Zyxel Community

    Once enabled, please share the login credentials for your device with us via a private message.

    Kay

    Untitled Image

    Share your feedback through our survey, make your voice heard, and win a WiFi 7 AP! https://bit.ly/2024_Survey_Community

  • Zyxel_Kay
    Zyxel_Kay Posts: 1,103  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - WLAN Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security

    Hi @Pedroj

    Thank you for sharing the remote web GUI details via private message. We're still investigating your issue.

    In the meantime, we would greatly appreciate it if you could provide us with the following additional information:

    1. How did you test the performance?
    2. What were the performance results before upgrading to version 1.30P1?
    3. Does the 1G internet access on the WAN refer to the ge1_PPP interface?

    Kay

    Untitled Image

    Share your feedback through our survey, make your voice heard, and win a WiFi 7 AP! https://bit.ly/2024_Survey_Community

  • Pedroj
    Pedroj Posts: 56  Ally Member
    First Comment Sixth Anniversary

    Hello,
    We tested the performance by connecting only one PC directly to the Firewall.
    Before the 1.30P1 update, the client had the maximum ISP speed.
    800M symmetrical and even more.
    Yes, the 1G access is PPoE.
    WAN2 is 4G
    Could you send me version 1.20 to try to give him a quick solution if the solution takes a while?
    The client is very upset.

Categories

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）