Cannot reach LAN from WAN

Options
Olegaas
Olegaas Posts: 3  Freshman Member
First Answer First Comment
edited April 2021 in Security
Dear All, 

At last week I install new USG60W.
First of all I upgrade software to verison 4.33(AAKZ.0)
It is easy to set it up, but port forwarding and SSL VPN unfortunatly do not work. 
I set them up both as in the manual and at log see next:
Match default rule, DNAT Packet, DROP [count=3].

If temporary switch OFF the Policy, SSL VPN and port forwarding start working.
Also I have 2 WAN's with TRANK enable.

I start to fing the solution here, but did not find anything like same.

All Replies

  • Olegaas
    Olegaas Posts: 3  Freshman Member
    First Answer First Comment
    Olegaas said:
    Dear All, 

    At last week I install new USG60W.
    First of all I upgrade software to verison 4.33(AAKZ.0)
    It is easy to set it up, but port forwarding and SSL VPN unfortunatly do not work. 
    I set them up both as in the manual and at log see next:
    Match default rule, DNAT Packet, DROP [count=3].

    If temporary switch OFF the Policy, SSL VPN and port forwarding start working.
    Also I have 2 WAN's with TRANK enable.

    I start to fing the solution here, but did not find anything like same.


    The problem fixed:
    Port forward problem: Destination IP must be: LocalFRWDHost
    SSL VPN: Configuration => Object => Service => Service Group need to add to group Default_Allow_WAN_To_ZyWALL  new member - HTTPS

Categories

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）