USG Flex 700H Bridge Interface to group individual ports

Options
phayze
phayze Posts: 34 image  Freshman Member
First Comment Friend Collector Second Anniversary
edited September 2024 in USG FLEX H Series

As the 2 SFP+ port on Flex 700H is considered individual port and cannot be group together. Can we use the below example to create a bridge to overcome this as the below example is on different platform as Flex 700? Is there any guide or example on Flex 700H platform?

USG FLEX / ATP: Bridge Interface – Zyxel Support Campus EMEA

Accepted Solution

  • Zyxel_Melen
    Zyxel_Melen Posts: 4,051 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    Answer ✓

    Hi @phayze,

    Please reference the below steps to configure: (I use internal role for example)

    1. Create the interfaces for SFP ports 13 and 14. image.png
      The interfaces after the configuration: image.png
    2. Create the bridge interface for the SFP ports. image.png

    Hope it helps.

    Zyxel Melen


All Replies

  • Zyxel_Melen
    Zyxel_Melen Posts: 4,051 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - Switch Zyxel Certified Network Administrator - Nebula Zyxel Certified Sales Associate
    Answer ✓

    Hi @phayze,

    Please reference the below steps to configure: (I use internal role for example)

    1. Create the interfaces for SFP ports 13 and 14. image.png
      The interfaces after the configuration: image.png
    2. Create the bridge interface for the SFP ports. image.png

    Hope it helps.

    Zyxel Melen


  • AndyY
    AndyY Posts: 4 image  Freshman Member
    First Comment

    does this work also when on each bridge port a single connection to a switch is connected?

Categories

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）