Trouble with NWA130BE
Freshman Member
Hello,
I have a NWA130BE Access point, I have updated the access point to the latest firmware I found V7.10 . I am having difficulty connecting the devices to the 6GHz band, I have even kept the radio for 2.4GHz and 5GHz to 0dBm with a channel size of only 20MHz but still I find my clients attaching with 2.4GHz and 5GHz instead of 6GHz where I have 320MHz channel and a radio radiating 30dBm. Only point when I have the radios for 2.4GHz and 5GHz turned off I find the clients moving to 6GHz band. Is there a setting or feature I can play around that might help. Even I have tried the load balancing option but still no help. Kindly help!
Accepted Solution
-
Hi @wifikid ,
If you want clients to connect only to the 6GHz SSID, you should disable the 2.4GHz and 5GHz bands completely rather than adjusting their power settings.
Even when you set the maximum output power to 0 dBm, clients may still connect to 2.4GHz and 5GHz SSIDs because these antennas have their own gain values.0
Zyxel Employee
All Replies
-
Hi @wifikid ,
If you want clients to connect only to the 6GHz SSID, you should disable the 2.4GHz and 5GHz bands completely rather than adjusting their power settings.
Even when you set the maximum output power to 0 dBm, clients may still connect to 2.4GHz and 5GHz SSIDs because these antennas have their own gain values.0
Categories
- All Categories
- 426 Beta Program
- 2.6K Nebula
- 163 Nebula Ideas
- 112 Nebula Status and Incidents
- 6K Security
- 345 USG FLEX H Series
- 289 Security Ideas
- 1.5K Switch
- 78 Switch Ideas
- 1.2K Wireless
- 42 Wireless Ideas
- 6.6K Consumer Product
- 261 Service & License
- 404 News and Release
- 86 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 3.8K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 85 About Community
- 82 Security Highlight
