USG Flex H series "no sooner than" roadmap for missing functions/features

dkyeager
dkyeager Posts: 71  Ally Member
First Comment Friend Collector Sixth Anniversary
edited November 2023 in Security

Is their a roadmap for when the missing functions/features in release notes 1.10 might be finished ("no sooner than")?

Of course there may be other items such as a config file converter, or a means to convert USG Flex licenses to series H. 50 functions/features or so no doubt means a small number of them will not perform as expected thus will need revisions.

I use quite a number of these missing functions/features. Thanks.

Here are the missing H series items as listed in 1.10:

Category Function/ Feature

Wireless
• AP Controller (AP Management)
• Secure Tunnel (Secure WiFi service related)
• Rogue AP
• Auto Healing
• RTLS

Network
• IGMP Proxy
• Egress/Ingress bandwidth setting
• Proxy ARP
• Bridge Interface (NAT/Routing mode)
• Link Aggregation Group (LAG)
• IP/MAC enforcement
• IPv6
• IPv6-in-IPv4 Tunnel
• 6to4 Tunnel
• WAN Load balancing – Least Load First
• WAN Load Balancing- Spillover
• SIP ALG
• GRE Tunnel
• Layer 2 Isolation
• DNS Load Balancing
• ARP Seal

Routing
• Healthy check
• Policy Route for IPsec VPN (route-based and policy-based are not supported)
• Dynamic Route (RIP/OSPF/BGP)

VPN
• VPN failover
• NAT over IPsec (subnet overlapping)

Object
• FQDN Object

Bandwidth Management (BWM)
• BMW function
• Schedule
• Download/ Upload Limit
• Guaranteed Bandwidth
• Priority
• 802.1P Marking

Authentication
• Authentication Policy
• Captive Portal
• Zyxel Single Sign-On (with SSO Agent)
• 2FA Authentication for Remote VPN

Security Policy (Firewall)
• Session Control

Security UTM
• DoH/DoT blocking
• External Block list for Content Filter and IP Reputation
• Collaborative Detection & Response (CDR)
• ADP–Protocol anomaly rules (specific scenarios use only)

High Availability
• Device HA

Management
• Nebula Management

Hospitality
• Hotspot Management

Authentication Server
• AD Server
• LDAP Server

Maintenance
• Shell script

Troubleshooting
• Web Console
• USB Storage

Accepted Solution

All Replies

  • Zyxel_Emily
    Zyxel_Emily Posts: 1,413  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Sales Associate 100 Answers 1000 Comments
    Answer ✓

    Hi @dkyeager,

    The following features will be implemented in the next official release uOS 1.20.

    image.png
  • mMontana
    mMontana Posts: 1,422  Guru Member
    50 Answers 1000 Comments Friend Collector Fifth Anniversary

    Bump up.

    https://community.zyxel.com/en/discussion/19810/features-not-yet-supported-in-zyxel-usg-flex-h-series-v1-10

    This topic can't be answered. 5 months has passed, any improvement from this status?

  • mMontana
    mMontana Posts: 1,422  Guru Member
    50 Answers 1000 Comments Friend Collector Fifth Anniversary

    UP! Again

    https://community.zyxel.com/en/discussion/19810/features-not-yet-supported-in-zyxel-usg-flex-h-series-v1-10

    In 5 months this post has not been updated. Currently Flex H Series is delivering v1.20 of firmware. Status must have been changed on some way. Please, update the list.

  • Doshgard
    Doshgard Posts: 2  Freshman Member
    First Comment

    Hi, the 1.30 seems to have included some of the listed items, but what's the schedule for the remainder?

    Especially IPv6, device HA, WAN load balancing/failover/spillover and link health check (ping + tcp) as well as usage of custom/self-defined block lists e.g. for reputation filter / content filter seem not yet to be included?

    Current plans are to migrate parts of infrastructure from ATP200 to USG Flex 200H as both are fanless and performance is becoming an issue (seems the currently implemented, quite overloaded rule set on my site is the cause for the current ATP200 to take 17 minutes for reboot/startup before connectivity is fully up again), but the missing features are currently kind of slowing down migration plans at the moment.

    Best regards

  • weite
    weite Posts: 23  Freshman Member
    First Comment Seventh Anniversary

    I agree with the previous speaker. Is there a current roadmap?
    I would also like to know what issues will be addressed next and when they will be published. We are also planning further changes, but the current status of the USG Flex H models puts me off.

    The support team always promises a lot, but delivers nothing. Sadly!

  • Agor76
    Agor76 Posts: 45  Freshman Member
    First Comment Friend Collector Seventh Anniversary

    As already requested by many, I’d like to know when WIFI AP Management will be available for the Flex H series.

    Regards

    Agor

  • Zyxel_Judy
    Zyxel_Judy Posts: 2,019  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security Zyxel Certified Network Engineer Level 1 - Nebula

    Hi @Agor76 ,

    The WiFi AP Management feature will be available for the Flex H series in firmware version 1.32 this April.

    Please follow the Firewall News & Release for updates on new features and enhancements.

    News and Release - Zyxel Community

  • EliteITGuy
    EliteITGuy Posts: 13  Freshman Member
    First Comment Fourth Anniversary

    Yes please, a roadmap. We are Nebula managed only and now there isn't fully nebula devices. We are stuck between a rock and a hard place. We can't buy fully nebula compatible devices and the new hardware isn't fully nebula capable.

  • Zyxel_Judy
    Zyxel_Judy Posts: 2,019  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security Zyxel Certified Network Engineer Level 1 - Nebula

    Hi Users,

    Here is uOS 1.32 (April 2025) Release Scope.

    1. Full Nebula management
      *Configuration Sync. (Local and Nebula)
    2. Secure WiFi (AP Management only) along with Secure WiFi License (LIC-GSP)
      *802.1x Authentication  (including 802.1x SSO)
      *L2 Isolation
    3. Tailscale-like VPN
    4. BWM per user/per source-IP/Schedule
    5. Captive Portal
    6. DoT/DoH Blocking
    7. LAG
    8. Route Trace
    9. Auto-link VPN (aka. Non-Nebula VPN)
    10. External User Group (Object) for Secure Policy (firewall rule)

    To learn about bug fixes, enhancements, and new features, please wait for the Firewall News & Releases in April.

    News and Release - Zyxel Community

Categories

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）