IGMP / Wireless /

Home_user · April 2019

Dear Zyxel.

I am not sure it's the correct question in the switch section but let's see..

Maybe it's a dum question but that is caused by lack of experience with this scenario.

Normally with IPTV you have this topology

Image: https://us.v-cdn.net/6029482/uploads/editor/xv/cl27klnlqawi.png

What now when i have the possibility to connect my TV(setup box) wirelessly to the topology like this:

Image: https://us.v-cdn.net/6029482/uploads/editor/31/ey67brxw6u6k.png

first off all.
Is this possible?
Do i need to configure something regarding IGMP on the Access Point or on the AP-controller?

Zyxel_Joslyn · April 2019

Hi,

So far, our AP and NXC support to forward multicast traffic now, but no IGMP function yet. Normally, we suggest to enable the IGMP function on the switch because if there are too many multicast traffic, the WiFi performance must be affected much. Use switch to limit the multicast traffic. It will be better for the WiFi environment.
Thanks.

Joslyn

Zyxel_Joslyn · April 2019

Hi,

So far, our AP and NXC support to forward multicast traffic now, but no IGMP function yet. Normally, we suggest to enable the IGMP function on the switch because if there are too many multicast traffic, the WiFi performance must be affected much. Use switch to limit the multicast traffic. It will be better for the WiFi environment.
Thanks.

Joslyn

IGMP / Wireless /

Accepted Solution

All Replies

Categories

Wireless Help Center