V1.32 not stable to the UI

Options
PeterUK
PeterUK Posts: 4,023  Guru Member
250 Answers 2500 Comments Friend Collector Seventh Anniversary
edited April 15 in USG FLEX H Series

Seems its back with V1.32 does not take much uptime to happen a few hours rebooted two times

Accepted Solution

  • Zyxel_Judy
    Zyxel_Judy Posts: 2,317  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Nebula Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 2 - Security Zyxel Certified Network Engineer Level 1 - Nebula
    Answer ✓

    Hi @PeterUK ,

    Thank you for your cooperation and remote sessions.

    As confirmed in our private communication, the unstable GUI issue with your USG FLEX 200H has been fully resolved with our solution (WK25 version update).

«1

All Replies

  • Asgatlat
    Asgatlat Posts: 115  Ally Member
    First Comment Friend Collector Seventh Anniversary

    so the 1.32 is more buggy than the 1.31 for the UI ?

  • PeterUK
    PeterUK Posts: 4,023  Guru Member
    250 Answers 2500 Comments Friend Collector Seventh Anniversary
    edited April 16

    Seem like it (or at least for me) had no problem with 131ABWV0ITS-0311-GUI

  • Peppino
    Peppino Posts: 162  Master Member
    First Comment Friend Collector Seventh Anniversary

    Yes, there are some inconsistencies and some strange behavior definitely. It's quite slow as well. Especially when you have an older PC.

  • PeterUK
    PeterUK Posts: 4,023  Guru Member
    250 Answers 2500 Comments Friend Collector Seventh Anniversary

    Zyxel are looking upto it they had a remote session for the console.

    Now with some uptime when you login it kicks you out to the login

  • Peppino
    Peppino Posts: 162  Master Member
    First Comment Friend Collector Seventh Anniversary

    Have you reset it to FD? During the beta tests it was regged to a temp server, so Nebula registration didn't work for me last week, after FD it started to live again.
    Sometimes it's just inevitable.

  • PeterUK
    PeterUK Posts: 4,023  Guru Member
    250 Answers 2500 Comments Friend Collector Seventh Anniversary
    edited April 16

    No I just hope I don't have to redo the config again

  • JS87
    JS87 Posts: 20  Freshman Member
    First Comment Friend Collector Fourth Anniversary

    1.32 seems to work better with my 700h.

    With 1.31 I had no SFP connections…

  • Asgatlat
    Asgatlat Posts: 115  Ally Member
    First Comment Friend Collector Seventh Anniversary

    no problem for my two 200h with 1.32

  • PeterUK
    PeterUK Posts: 4,023  Guru Member
    250 Answers 2500 Comments Friend Collector Seventh Anniversary
    edited April 18

    Problem might be case #446011 and that I route Zywall with WILDCARD FQDN for Zyxel out VLAN443 that it does not show the FLEX as online when having many interfaces in a trunk

  • PeterUK
    PeterUK Posts: 4,023  Guru Member
    250 Answers 2500 Comments Friend Collector Seventh Anniversary
    edited April 18

    So Zyxel look like they are now analysing data from console but I think I can narrow the problem down so here is my theory that I'm testing now with V1.32

    I have this routing rule

    Screenshot 2025-04-18 161446.png

    and trunk

    Screenshot 2025-04-18 161703.png

    When its just trunk for VLAN443 only their hopefully be no problem but its when I set the trunk to like WAN3_2_VLAN (with many interfaces) thats when the problem happens…

    and if I am right that means if the connection to nebula is loss in some way the UI fails which is not good😕

Categories

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）