200H with 1.32 - Only 2 CPUs working

GiuseppeR · May 30

Hello everyone,

when I go into CPU details of my 200H I see that only first 2 CPUs are working:

also under heavy load (like collecting diag infos).

Is this correct?

Core3 and 4 are not enabled to increase performances?

Zyxel_Judy · June 5

Based on the system architecture:

Core 1 & Core 2 handle firewall system operations, GUI display, and other processes (including diagnostic file collection)
Core 3 & Core 4 are dedicated to traffic forwarding and traffic routing functions. From the screenshot you provided, it appears that your 200H device is currently processing minimal traffic load.

Zyxel_Judy · June 5

Based on the system architecture:

Core 1 & Core 2 handle firewall system operations, GUI display, and other processes (including diagnostic file collection)
Core 3 & Core 4 are dedicated to traffic forwarding and traffic routing functions. From the screenshot you provided, it appears that your 200H device is currently processing minimal traffic load.

GiuseppeR · June 12

thanks for these details, I thought they were all usable by the system.

I'll add massive traffic from P2P to check the other 2 Cores, I'll update you if I see no usage.

Is traffic inspection managed only by Core 3 and Core4?

Zyxel_Judy · June 13

Is traffic inspection managed only by Core 3 and Core4?

Yes.

Accepted Solution