USG FLEX H Advanced DHCP functions not available and more

Options
Xelvin
Xelvin Posts: 2  Freshman Member
First Comment Sixth Anniversary
edited February 2024 in USG FLEX H Series

When setting up my new USG Flex 200H i cant find the Advanced DHCP functions setting.

The "old" USG FLEX 200 was able to set this function however the H doenst show this function, how do i get this fixed.

I need to set DHCP code 43

Also the option FQDN is missing when adding addresses under object, the device seems not finishend yet

Accepted Solution

All Replies

  • PeterUK
    PeterUK Posts: 4,023  Guru Member
    250 Answers 2500 Comments Friend Collector Seventh Anniversary
    Answer ✓

    more info here

    https://community.zyxel.com/en/discussion/comment/59735#Comment_59735
  • qsystem
    qsystem Posts: 3
    First Comment Friend Collector Second Anniversary

    Hi PeterUK

    Is it possible to set DHCP option 66 via cli command?
    If it's possible, can you send me the commands to configure it in 500H ?

  • WJS
    WJS Posts: 156  Master Member
    5 Answers First Comment Friend Collector Third Anniversary

    #edit running

    #vrf main main dhcp server subnet {your dhcp subnet} dhcp-options user-defined <value>

      <uint8>              Max count: 15.

                           ZLD dhcp server option 0 user defined, user-defined

                           [code] [type] [value]

    #commit

  • Xelvin
    Xelvin Posts: 2  Freshman Member
    First Comment Sixth Anniversary
    edited April 2024

    Since update 1.20 the Advanced DHCP functions are available only not code 43 😵 why? in the normal flex series this works.

    image.png

    Via the console option 43 is possible 🤪

  • davide_v
    davide_v Posts: 2
    First Comment

    I have an USG FLEX 500H and use rule with EDQN is still not possible. I've installed the last fimware.

    Can you please provide a solution?

  • Alex_91
    Alex_91 Posts: 37  Freshman Member
    First Comment Friend Collector Seventh Anniversary

    In 06/2025 with firmware 1.32 can use different code option but 43 still not aviable, why?

    By contradiction 41 can use it.

Categories

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）