How do I stop NWA50AX MBSSID defaulting SSID to slot 8 on list for Radio 2?

Options
NoncreativeUsername
NoncreativeUsername Posts: 2  Freshman Member
in Wireless

I'm using the Zyxel NWA50AX in standalone mode, and I've noticed that the MBSSID Settings interface always places my active SSID profile at the bottom of the list (e.g., slot 8), regardless of configuration order. This seems to only happen on Radio 2. Is there a way to fix it? Each time I set it to #1, and apply the changes, it goes right back to #8.

Thank you.

Screenshot 2025-07-05 221045.png

All Replies

  • Zyxel_Tina
    Zyxel_Tina Posts: 48  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Network Administrator - Switch 5 Answers First Comment

    Hi @NoncreativeUsername,

    Welcome to Zyxel Community!

    Normally, all slots in the MBSSID settings should be editable. We've tested this behavior using a similar model running the latest firmware version, V7.10(1), and confirmed that all slots (1–8) can freely accept any SSID profiles. You can see the demonstration in the following recording:

    https://jam.dev/c/25c4b41f-cf02-4ace-9548-38dd9d6e25ba

    To help us better assist you, could you please share a video of your configuration steps as well? Also, kindly provide us your device’s diagnostic file via private message. You can refer to this FAQ for instructions on how to collect the diagnostic info file.

    Zyxel Tina

Categories

Wireless Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）