Where do I download the factory-default configuration file to reset an XGS-4526 switch?

Options
BarryMcKochener
BarryMcKochener Posts: 2 image  Freshman Member
First Comment Fourth Anniversary
in Switch

I have an XGS-4526 but I forgot the administrator login. The manual says to reset the switch by loading the factory-default configuration through a console cable. Where can I download the factory-default configuration file?

Accepted Solution

  • BarryMcKochener
    BarryMcKochener Posts: 2 image  Freshman Member
    First Comment Fourth Anniversary
    edited August 2025 Answer ✓

    Nevermind. I found that I had a copy of the firmware XGS-4526_400(BHN.2)C0.zip, extracted the .ROM, then followed the reset procedure and uploaded this .ROM. When it came up, the switch was reset and i was able to get into it using the default login and management IP addresses.

All Replies

  • BarryMcKochener
    BarryMcKochener Posts: 2 image  Freshman Member
    First Comment Fourth Anniversary
    edited August 2025 Answer ✓

    Nevermind. I found that I had a copy of the firmware XGS-4526_400(BHN.2)C0.zip, extracted the .ROM, then followed the reset procedure and uploaded this .ROM. When it came up, the switch was reset and i was able to get into it using the default login and management IP addresses.

Categories

Switch Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）