Static ARP Table

Ich
Ich Posts: 5  Freshman Member
First Comment
in Security

Hi,

With the USG series I used a little CLI script to set up static ARP table entries (these entries are required to forward WoL packets from VPN connected management stations).

Example:

configure terminal
arp 10.1.1.1 12:23:34:56:67:78
exit
write

How can I achieve a static ARP table entry with the current USG Flex H series?

Thanks in advance…

Accepted Solution

  • zyman2008
    zyman2008 Posts: 235  Master Member
    25 Answers First Comment Friend Collector Seventh Anniversary
    Answer ✓

    Hi @Ich ,

    You can try this CLI.

    In case the client is under LAN interface ge3.

    IP address is 192.168.168.100 with MAC address 00:11:22:33:44:55

     > edit running
     # / vrf main interface ethernet ge3 ipv4 neighbor 192.168.168.100 link-layer-address 00:11:22:33:44:55
     # commit
     # copy running startup
     # show arp-table

All Replies

  • Zyxel_Tina
    Zyxel_Tina Posts: 193  Zyxel Employee
    Zyxel Certified Network Administrator - Security Zyxel Certified Network Administrator - Switch 50 Answers First Comment

    Hi @Ich,

    Thank you for raising this question.

    After confirmation, we can confirm that the current USG FLEX H series does not support configuring static ARP entries. We will forward your requirement as a Feature Request to our development team for further evaluation and also create an idea post for you.

    If anyone likes this idea, please show your support by leaving a comment or voting for it.

    Zyxel Tina

  • zyman2008
    zyman2008 Posts: 235  Master Member
    25 Answers First Comment Friend Collector Seventh Anniversary
    Answer ✓

    Hi @Ich ,

    You can try this CLI.

    In case the client is under LAN interface ge3.

    IP address is 192.168.168.100 with MAC address 00:11:22:33:44:55

     > edit running
     # / vrf main interface ethernet ge3 ipv4 neighbor 192.168.168.100 link-layer-address 00:11:22:33:44:55
     # commit
     # copy running startup
     # show arp-table
  • Ich
    Ich Posts: 5  Freshman Member
    First Comment

    Thank you. This works great 😀

    Would be nice, if the "ipv4 neighbor" command would sneak into the reference guide…

Categories

Security Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）