ATP500 VLAN on one port untagged

Stefan_1979_CH · August 29

Hi

Is it possible, to assign one free port on the ATP500 to a VLAN, untagged? I have one trunk that leads to a main switch, but the switch is in a different room. And there is one system next to the ATP, that belongs to VLAN19. Do i need an additional switch next to the ATP?

Thank you.
Stefan

PeterUK · August 29

Any VLAN you do on the ATP will be tagged you cant have a untagged VLAN where by one port tag traffic and the other grouped for the same subnet untag.

so you need a simple VLAN switch

GS1200 Series | 5-Port/8-Port Web Managed Gigabit Switch - Overview | Zyxel Networks

The other way is to use a port group untag one off to device other to where your main switch is for VLAN19 takes it untag to be on the VLAN19

PeterUK · August 29

Any VLAN you do on the ATP will be tagged you cant have a untagged VLAN where by one port tag traffic and the other grouped for the same subnet untag.

so you need a simple VLAN switch

GS1200 Series | 5-Port/8-Port Web Managed Gigabit Switch - Overview | Zyxel Networks

The other way is to use a port group untag one off to device other to where your main switch is for VLAN19 takes it untag to be on the VLAN19

Stefan_1979_CH · August 30

Okay, thank you.

I'll have to get the switch then.

ATP500 VLAN on one port untagged

Accepted Solution

All Replies

Categories

Security Help Center