Mail Alert request
Freshman Member
Accepted Solution
-
There are 2 kind of interface line down.
(1) Link down. (category: System)
(2) Link up but connection dead. (category: Connectivity Check)
You can go to Configuration > Log & Report > Log settings > Edit “System Log”
After configured SMPT setting and enabled alert function in “connectivity check” and “system” category.
Then you will receive this mail when port link down.
6
Zyxel Employee
All Replies
-
Yes, turn on the connectivity check for the WAN interface and then set up an email trigger for "Connectivity Check" category.
0 -
There are 2 kind of interface line down.
(1) Link down. (category: System)
(2) Link up but connection dead. (category: Connectivity Check)
You can go to Configuration > Log & Report > Log settings > Edit “System Log”
After configured SMPT setting and enabled alert function in “connectivity check” and “system” category.
Then you will receive this mail when port link down.
6
Ally Member
Categories
- All Categories
- 442 Beta Program
- 3K Nebula
- 231 Nebula Ideas
- 131 Nebula Status and Incidents
- 6.6K Security
- 671 USG FLEX H Series
- 360 Security Ideas
- 1.8K Switch
- 87 Switch Ideas
- 1.4K Wireless
- 56 Wireless Ideas
- 7.1K Consumer Product
- 307 Service & License
- 500 News and Release
- 96 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 5.1K FAQ
- 34 Documents
- 89 About Community
- 111 Security Highlight
