Add the function lock the client to specific bssid station

Twan · May 29

So i want to set a client to only connect to my living room ap and not the other ap's this is possible with other vendor ap's but not with zyxel nebula i hope to see this function fast because we need to lock clients to specific ap, Function is called like BSSID Lock or AP Lock

Priority= High

Zyxel_Judy · May 29

Hi @Twan ,

When the AP is in standalone mode, the SSID settings are configured independently on each AP. This allows you to assign a specific SSID to the AP in your living room separately from the others.

Zyxel_Judy · June 3

If your APs are in Nebula, the feature is available. Please refer to the FAQ below:

https://community.zyxel.com/en/discussion/20201/how-to-configure-unique-ssid-on-specific-access-points-on-nebula

Twan · July 2

No i meant a function that you could lock a certain device to a ap which they call bssid lock

Twan · July 2

So like a client device

Zyxel_Judy · July 7

Hi @Twan ,

We'll evaluate this feature request.

In the meantime, you can use the MAC filter feature as a workaround. This allows you to add a client's MAC address to the allow list for your living room AP and to the block list for all other APs. For detailed instructions, see our MAC filter guide:

https://community.zyxel.com/en/discussion/22343/how-to-block-the-certain-wireless-client-on-an-ap

Add the function lock the client to specific bssid station

Active · Last Updated May 29

Comments

Categories