[USG Flex H] - Secondary firmware image/partition
Master Member
Hello,
I have an USG Flex H firewall and seems that is not present the possibility to boot up the firewall from a secondary boot partition.
In some other brand (I have two switches of other brand), there is a possibility to boot up the system from two images; those images containing the firmware and I can choice what image upgrade and what image is the next running boot.
For example, I use those images switching them between updates:
- Image1: Previous firmware
- Image2: Current firmware (boot)
When I need to perform the upgrade, I choice the oldest image and upgrade this, then I switch the boot image, in this way I obtain:
- Image1: Current firmware (boot)
- Image2: Previous firmware
In this way, I have always a previous/working firmware, and if there is a failure or feature failure on the current, I can boot up the previous/working firmware waiting a patch to the current.
It's possible to implement this on our USG Flex H?
Thank you
Accepted Solution
-
hi it’s there today but hidden!
See
0
Freshman Member
All Replies
-
hi it’s there today but hidden!
See
0 -
Hi @MCFH,
Thank you, I will try it.
Meanwhile, I opened an idea to enable this configuration directly from the GUI without enter those commands.
If you like:
0
Categories
- All Categories
- 442 Beta Program
- 3.1K Nebula
- 234 Nebula Ideas
- 6.7K Security
- 726 USG FLEX H Series
- 372 Security Ideas
- 1.8K Switch
- 87 Switch Ideas
- 1.5K Wireless
- 57 Wireless Ideas
- 7.1K Consumer Product
- 318 Service & License
- 511 News and Release
- 99 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 5.2K FAQ
- 34 Documents
- 89 About Community
- 116 Security Highlight
