BPDU - GS1910-24HP
I have config a vlan to other cisco switch, the cisco switch disable the port because bpdu was sending to their switch from my gs1910-24hp.
This is answer from their network team:
I can see that the BPDU protection kicked in. Pls ask the vendor if they can configure their switch to stop advertise BPDU packets to our network. We have this filter to protect us from unwanted topology changes.
How can i that to the specific vlan port.
Accepted Solution
-
Hi @Patricki
Welcome to Zyxel community!
To stop sending BPDU packet you have to disable spanning tree, please go to "Configuration -> Spanning Tree -> STP CIST Port Configuration" to make adjustment.
Hopefully this is what you seek.
Zyxel_Lucious
5
Zyxel EmployeeAll Replies
-
Hi @Patricki
Welcome to Zyxel community!
To stop sending BPDU packet you have to disable spanning tree, please go to "Configuration -> Spanning Tree -> STP CIST Port Configuration" to make adjustment.
Hopefully this is what you seek.
Zyxel_Lucious
5 -
thanks for your fast answer.
it worked really Good.
0
Categories
- All Categories
- 300 Beta Program
- 1.9K Nebula
- 103 Nebula Ideas
- 72 Nebula Status and Incidents
- 4.8K Security
- 4 USG FLEX H Series
- 242 Security Ideas
- 1.1K Switch
- 54 Switch Ideas
- 807 WirelessLAN
- 29 WLAN Ideas
- 5.5K Consumer Product
- 178 Service & License
- 309 News and Release
- 69 Security Advisories
- 19 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.3K FAQ
- 556 Nebula FAQ
- 349 Security FAQ
- 118 Switch FAQ
- 147 WirelessLAN FAQ
- 33 Consumer Product FAQ
- 114 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 70 About Community
- 56 Security Highlight
