[USG Flex 500H] - Fans seems noisy
Master Member
Hello,
I have an 500H that have fans that seems noisy.
Actually seems that rotates between 4600rpm and 5600rpm (SNMP sensor value).
I also have a Raspberry PI with the active cooler fan (original) that rotate to 4500rpm and don't produce any eccessive noisy.
There is a way to open/unmount the 500H for trying to clean and grease the fans, without break the warranty?
Thank you
All Replies
-
Hi @Maverick87 ,
Regarding the warranty, we will further clarify the details with our local European team.
In the meantime, we strongly advise you not to open or disassemble the USG FLEX 500H at this stage to clean, lubricate, or replace the fan, as doing so may void your warranty. Instead, you can safely use a can of compressed air to gently blow through the chassis ventilation grilles from the outside to remove accumulated surface dust without opening the device.
Thank you.
0 -
Hi @Zyxel_Luna,
thank you so much…. in case, do you have fan specifications? dimensions, connector type?
I'll wait your reply about the warranty…
0 -
Hi @Zyxel_Luna,
I've received the ticket from the Support… thank you so much
1
Categories
- All Categories
- 442 Beta Program
- 3.1K Nebula
- 237 Nebula Ideas
- 6.8K Security
- 740 USG FLEX H Series
- 376 Security Ideas
- 1.8K Switch
- 87 Switch Ideas
- 1.5K Wireless
- 58 Wireless Ideas
- 7.2K Consumer Product
- 319 Service & License
- 512 News and Release
- 99 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 5.3K FAQ
- 34 Documents
- 91 About Community
- 119 Security Highlight
Zyxel Employee