-
Set VLAN ID for WAN interfaces [AX7501-B0]
Hello, I'm relatively new to ZyXel devices, before I worked mainly with others. I'm trying to configurate a ZyXel AX7501-B0 via SSH now. Instead of an CLI I'll get into the "ZySH". How do I configurate the VLAN-IDs with this tool? I tried "active servicename GPON —VLAN enable —8021q 11" But I'll get an error (an acitve…
-
how to set auto reboot on ex3220-to
-
Zyxel DX3101 set more than 32 ip/mac rules
Hello everyone I use the Zyxel router, which my provider (A1) provides. I'm actually happy with it, the only thing that bothers me is the limited IP/Mac address assignment I can make a maximum of 32 assignments. The router then writes “Max. number of rules reached”. Therefore, I now always have to think about which device…
-
default username and password
i received this router form my ISP but the firmware on router now It doesn't work well and I've seen the original Zyxel firmware for this router, there's a lot of features that don't exist . I know Zyxel is a big company with excellent customer service. my question is if I downloaded firmware form website Zyxel version…
-
Initial password for firmware version 5.50ABPM8.3.C0
model name is VMG3625-T50B i downloaded firmware form website Zyxel version 5.50ABPM8.3.C0 if I install this version what's the default username and password
-
ZYXEL DX3301-T0 und Deutsche Telekom: Analog-Telefone gehen nicht
Hallo zusammen, ich habe einen Telekom-Anschluss und den DX3001-T0 für DSL konfiguriert. Das hat gut geklappt. Was aber nicht funktionieren will ist die Telefonie. Ich möchte unsere zwei Analog-Telefone am Router anschließen und bin nach dieser Anleitung vorgegangen:…
-
AX 1800 AP Mode reach webinterface
Hi Team, everytime I switch the AX1800 into AP mode or bridged mode I cannot access the webinterface (yes I know the IP) anymore. I have also turned off the firewall before. How can I do this? I have already updated the firmware today. What are the steps that I need to do?
-
Want to disable WPS but button is greyed out
Hi I want to hide my SSID, but when I try to do this, I have a message "Hide SSID does not support WPS 2.0. You should disable WPS in WPS page." But when I go the WPS pane, the WPS button greyed out, what can I do ? Thank you for your suggestions ! model: AX7501-B0 firmware:v5.17(ABWW.5)C0
-
Zyxel DX3300 night mode/LED off?
Guys, I have scanned the user guide many times, but I cannot see a setting on this router to turn off the LED? Is this not possible? I wanted to pair it with a WX3100, but turn off the LEDs on both units. Thanks
-
port forwarding on VMG4005 modem
Is it possible?
-
pppoe connection not working
i recently took a vodafone connection in germany. they shared me a username and passowrd for pppoe. i tried all possible ways to connect but internet is not working. its shows red sign for internet to router. what is the issue here? my model is NBG7510
-
Zyxel VMG3925-B10C
Hi everyone, i have been hunting high and low for a firmware for the VMG3925-B10C i can find the B no problem, i have tried the FTP site which i found on this forum but it looks like its been removed, any help would be appreciated.
-
internet lights is green but not working
hi i have modem del1312-t10b after config internet lights turn to green and everything look good but when i connect to the modem with laptop or phone say you won't connect to internet i try wifi and cable but nothing work
-
NBG7510 MAC filtering not working
Hi I just found out that MAC filtering on the Zyxel NBG7510 router does not work in allow mode. I rebooted the NBG7510 and was still able to connect every device I tried. Is it possible to get a firmware update or something similar? Have I missed some important setting to make the filtering work? Additional information:…
-
[solved][VMG8825-T50] Unable to connect a machine
Hello, I've got a new modem-router (VMG8825-T50, firmware V5.50) and I've got an issue. One of my computer doesn't appear in the UI. But I can reach it in SSH, Webdav or by mounting a samba share. It slow but it works. This computer run Proxmox and two VM. None of these two VM can be reach. Do you have an idea about this…
-
EX5601-T0 and MPro Mesh App
I'm trying to use the MPro Mesh App on my Android Phone with a EX5601-T0 router Both are on the same WiFI network. The app complains that it "Cannot Connect to the WiFi router". Any suggestions on how to get the app to connect? Thanks
-
NBG7510 running V1.00 (ABZY.6)C0 not showing all my devices anymore. Why?
Hi Zyxel, My NBG7510 running V1.00(ABZY.6)C0 is not showing all my devices anymore in the WebGUI. It has been running without a reset for 43 days. The connectivity picture is only showing 2 hosts connected to the router, which is a reflection of how many NAT sessions the NBG7510 thinks it has, see below. But I have more…
-
Firmware Update PLA6457
Hello Everyone, for the PLA6457 there's firmware release (ACAJ.1)C0 with following note: 01/26/2022 Support HW2.0 Could anyone answer, what is this "HW2.0"? Does this update affect the transmission performance? Thanks in advance. Toni
-
EX3220-T0 can't be Mesh agent
When I config EX3220-T0 as a mesh agent, there' s no option on UI, MPro Mesh can enable and only work as controller. How to config it as mesh agent? Or maybe need upgrade firmware? (I can't find where to download firmware.)
-
How do I "fix" the message "invalid preshared key"?
Trying to set up the guest account - each time I select "save" i get a message stating "invalid pre-shared key". What am I missing/need to do? (Please - in VERY basic simple steps !!!)
