-
Cant login to Web Configurator
Hi, I've just bought the Armor G5 and after 2 hours of trying to connect to the web configurator I eventually got it set up using the app, unfortunately I still cannot access the web configurator using either http://zyxelwifi.com or http://zyxelwifi.net, I can access the internet and everything else but i need to makes…
-
The WAN/DSL router seems stuck on DSL though switch on back is on WAN. ZYXEL P-2812HNU-F1 vT
My mother has an older WAN/DSL wireless router P2812HNU-F1 vT - the network is fine, already tested, fiber. This happened suddenly after a blackout: When connecting the WAN cable to the router the NSP cant find the router. The Wireless led is blue, Power is red, DSL orange and the Internet red (WAN led is off). The WAN/DSL…
-
can't remember password and have reset router and it won't recognize any of the suggestions i got
online cant get my kindle to connect. my computer works help!!
-
AX7501-B0 Parental control missing
Hi, AX7501-B0 with firmware V5.17(ABPC.1)C0 When using Parental control the only thing I can do is add a profile, select devices and time / day schedule but there is no option to add URL’s for blocking etc as per the instruction manual. The option in security isn’t there. Thanks.
-
AM3100-B0 NAT Problems
Hi !Any of you know how to add this configuration to NAT? TCP: 3074,27014-27050 UDP: 3074, 3478, 4379-4380, 27000-27031, 27036 When I enter the Zyxel AM3100-B0 administration panel, I can only set the port, e.g. 3074, but I cannot set the range 27014-27050. After changing the internet provider, the Zyxel AM3100-B0 router…
-
AP Isolation EX5401-B0
HiOn all of the other zyxel routers & everyone I have owned there was AP isolation per SSID. On EX5401-B0 I do not see it and there is only a panel to add additional SSID on the guest tab where one can make subnets-which is very good addition---but on these subnets where is the option for AP isolation. I use the router…
-
Brand new Zyxel EX3301-t0 just hangs after 4-5h ... any ideas ?
Hello everyone, This week I bought a router Zexel EX3301-T0 (EX3301-T0 Dual-Band Wireless AX1800 Gigabit Ethernet IAD | Zyxel), works almost great ... in fact, after 4-5h, it cuts my Internet connection : I can't access to the router no more, nor my NAS attached to it ... the only way to get it back is to reboot it ... I…
-
recently purched wifi router
I recently bought a zyxel nbg4615 v2 model number router off of newegg. it got deliverd today (7/11/2022) went to go set it up and i can't seem to connect to the router to set it up. the power light flashes for a few seconds becomes solid then after another few seconds turns off. If i have a device plugged in the port…
-
Firmware Upgrade NBG418Nv2
Need the latest Firmware Upgrade for NBG418Nv2 Please help!
-
how do I correctly do I correctly configure port forwarding in vmg1312?
how do I correctly configure port forwarding to my pc that runs a web server and the router home page does not appear?
-
ow do I correctly configure port forwarding to my c that runs a web server and the router home page
I have a router model vmg1312 and I forward the ports to the address of my PC, which is running a web server, the router vgm1312 enters the home page of the router itself and not my destination PC that I configure in forwarding ports. Why does this happen?
-
VMG8825-T50 Router - NO USB Connect Settings on Web interface
Hi, this router has a USB 2 and USB 3 port for plugging in drives. But when I log into my admin settings via the computer, there is no section that enables me to configure a USB drive - it is completely missing from the settings. I found an instruction manual online that is for this specific router, and indeed it instructs…
-
VMG8825-T50 LED
Can I turn off he LED?
-
Replacement for the ZyXel P-871M VDSL2 Point To Point Modem
Hi, we have been using ZyXel P-871M VDSL2 Point To Point Modem. Where one P-871M device is switched to CPE mode and one device to C0 mode, which gives you an Ethernet bridge over a single pair of 2km wire. Unfortunately it looks like the P-871M has been discontinued in 2015. Is there a successor or replacement for the…
-
How can I connect to my router after a factory reset ?
Hi ! I accidentally factory reseted my Zyxel NBG6503 modem ( I thought it was just a soft reset) . I'm trying to configure everything back now on http://192.168.1.1 But to access that, I need to connect my PC or my phone to the modem, which requires a password, as usual. The default WPA2 key written in the back of my modem…
-
Parental control not working on VMG3625-T50B router
I received my VMG3625-T50B yesterday. I tried setting up parental control only to find out that you cannot set the block for two different days. In other words, I want to set out the block so that it starts on 11 pm and ends on 6 am the next day. Why is this not possible? It seems that you can only create a block for the…
-
No internet with AP that is connected to a Zyxel VMG8825-B50B
Hello,I'm having a weird issue.I have a TP-Link AX10 configured as an Access Point, connected to a Zyxel VMG8825-B50B router via a cable. The AX10 gets an IP address from the router. Wired clients to the AX10 are getting internet access, but any wireless clients don't.The wireless clients get an IP address in the network.…
-
Firmware for zyxel g-1000 v2?
Im looking for a firmware for this old product. Spent some time searching online with no luck. If i remember right, there was and ftp with lots of firmware before? It currently has v3.60. So 3.60 or newer
-
Firmware update help
I have a Zyxel EX5510-BO on V5.15(ABQX.2)C0 but yet there is a V5.17(ABQX.5)C0 update available but I cannot find the update file anywhere, does anyone know how I can get this firmware to be able to update my router?
-
I need software for zyxel vmg3625 t50b
I need software for zyxel vmg3625 t50b
