-
Expert Q&A: Why 5G is worth it
Zyxel has been one of
the earliest networking manufacturers to release complete 5G product lines. We
spoke to Patrick Hirscher, Zyxel’s EMEA LTE/5G Market Development Manager,
about 5G’s most promising applications and markets, and how we can benefit from
this emerging technology. 5G is always being called a “game…
-
Sim card not ready
Hello, i have a problem with router, it says sim card is not ready and disconnects me from internet, however the wifi symbol stays with a "!" Behind it. When i put it inside my phone, everything is fine and works. Once i put it back into the router it wont work. I had this issue before, i contacted the ISP they said its…
-
LTE5388-M804 sms don't work
Hi, I have recently purchased the LTE5388-M804 router that I am using with a WindTre sim and both internet browsing and telephone calls works well. On the other hand, I can't get sms to work. When I enable the function from the menù "impostazioni di rete/broadband/cellular sms", it seems to be activated but, then just…
-
LTE3301-Plus in Bridge Mode with USG Firewall
Dear readers I bought today a band new ZyXel LTE3301-Plus LTE Router as of yesterday the fiber cable was destroyed. So we won't have any internet for the next 5 days in our office. The specs say the LTE3301-Plus supports a bridge mode but I cannot find the settings in the new web interface. There are a lot of old…
-
Is there a user guide for NR7101?
I think I have looked all over the place, but except for the tiny setup folder that came with the package I fail to find any type of documentation for the device. Am I just not looking in the right place, or is there actually not even an online user guide?
-
LTE5366-M608 connection problems
Hi there, I bought a Zyxel LTE5366 router that came with V1.00(ABKA.1)C0 firmware but this was completely unusable because I got invalid SIM Card every time a tried to edit any option. Just edit, click save and connection was lost and I had to remove and reinsert the SIM Card. Then I saw that there was an older firmware on…
-
LTE7480 - M804 SIM is not detected
Hi All, Hi, I have bought the router LTE7480-M804 and I am trying to configure it, but I am some issues about the cellular SIM. Once I have started up the router, the system is not able to detect my SIM card. The status of the cellular SIM is " Sim CARD is not detected". The sim is perfectly working on my phone. I 've set…
-
SIM Card not ready
I bought recently an LTE3302-M432 and now try to make it work, to no avail : despite the SIM card working in a phone, I got the message "SIM card not ready" on the web interface of the router, and blinking red on LTE signal LED. A quick check online shows that's quite a classic issue, but I have not yet found a correction.…
-
LTE7480-M804, latest firmware caused internet access problems when connected by Wifi
Good morning, yesterday I updated the firmware from 1.00(ABRA.0)C0, to the latest: 1.00(ABRA.1)C0. Since then wireless devices can connect and work over the local area network, but have no internet access, for example our mobile phones. We have done a full factory reset, and obviously have tried reconnecting the phones. As…
-
Bugs found in NR2101
Just taken delivery of the new NR2101 5G MiFi. I've found some bugs the ZYXTel team need to be aware of. If you change the 5GHz WiFi channel from auto to any other channel, then 5G becomes disabled and even though 2.4GHz is turned off it becomes enabled. 5G indicator is on the device screen but WiFi spectrum analyser shows…
-
Playing on PlayStation 4 on NR2101 doesn’t work. It relies on UPnP.
Lately I wanted to play some games on my PlayStation 4 with a friend over internet. We could connect fine with voice chat, but when trying to connect a game we only got “no connection” or “connection failed” no matter what we tried. After investigating a bit I find that the PS4 reports NAT-type 3, which means that it is…
-
LTE5388-M804 bridge mode
I have bought a LTE5388-M804 which seems to work well 'out of the box', but I would like to use it in a specific configuration. As there is no manual for the product I hope someone here can help. I have an office network with DHCP and firewall working well and I would like to connect the WAN from that to this unit for…
-
LTE7490-M904 in IP Passthrough mode and Administering the device
Hi,I have a LTE7490-M904 and an USG20-VPN. I would like to setup the LTE7490-M904 to IP Passthrough mode, but it is not clear to me how the administrating is done once the IP Passthrough mode has been enabled. The user guide is not very clear (at least to me) in this matter so detailed instructions would be nice to have.…
-
My LTE5321-Q104 is stuck and cannot be factory reset?
My LTE5321-Q104 is stuck and cannot be factory reset? I pressed factory reset button for so long but it does do anything.
-
LTE7490-M904 Bridge mode and IP Forwarded
Goodmorning everyone I would like to ask information about the bridge mode on my LTE7490, in fact when I set this mode the Ip address that is assigned to the connected device is not the Public WAN but another that usually starts with 10.x.x.x, why? This way port forwarding doesn't work! Did I do something wrong? On my…
-
LTE7490-M904 I have the latest firmware 1.00(ABQY.2)C0 but i can`t find cellular lock? STRANGE!!!
-
LTE7490-M904 SIM Compatibility
Hi! Today have ordered a Zyxel LTE7490 Outdoor CPE for replacing previous 4G Antenna, in the Amazon review and answers seems that the CPE is not compatible with italian cellular operator TIM and only with specific firmware works, can you confirm this or was solved with latest firmware? Thank You in advantage!
-
LTE4506-M606 - V1.00(ABDO.6)C0 - Internet access down after LTE renew connection from SFR
Hello, I updated this Saturday from V1.00(ABDO.4)C0 to V1.00(ABDO.6)C0 and I lost Internet connection after the reboot. DNS resolution was OK, but Internet sites access DOWN. Reboot again fropm the GUI, then Internet sites connections were UP. I got the same error today after a reset from SFR (changing the connection on…
-
LTE3302 Firmware upgrade failure
Hi, I tried to update the firmware, downloaded the latest version (LTE3302-M432_V1.00(ABKQ.1)C0.zip), check checksum, unzip, select *.bin file in WebGUI, click "Upload" but unfortunately it failed. Onthe back of my device I found "LTE3302-M432". I tried reset to factory settings (from WebGUI), and push switch "RESET" on…
-
LTE3316-m604 When connecting 4G clients via wi-fi lose access to the local network
LTE3316-m604 When connecting 4G clients via wi-fi lose access to the local network. If you connect to the Internet via cable, the local network for customers via wi-fi is available. If you switch to 4G SIM card, the access is immediately terminated. Tracert shows packet loss or loss in excess of 2000 milliseconds. Firmware…
