-
Lte7240-M403 How to reboot by ssh or telnet
Hello, guys! How can i remote reboot this thing using ssh/telnet? I've already try 'sys reboot', 'zycli sys reboot', 'reload', 'restart', but nothing works=( I'm use Windows 10 Telnet and Putty and no result=( #SP_Feb_2020
-
Slow upload on NR7102
Download speed is OK (200 - 280 Mbps), but upload is typically 8-9 Mbps. As a reference, I compare with a 4G router (ZTE mf286d) at the same location, giving 100 / 50 Mbps down / up. Anyone with a similar experience? Thankful for any hints. Will reflashing the module be to any help? Firmware version is RG502QEUAAR12A03M4G,…
-
FWA510 vs FWA710 indoor / outdoor
Greetings community, recently i bought my 1st zyxel product Multy M1 to have wifi mesh to my home, and i am keen on buying also a new 5G router. Currently i am with a mikrotik chateu lte12 4G,(stock antennas/indoor) and looking to upgrade. I set my eyes on FWA510 and FWA710 which are completely different routers…
-
ERR_CONNECTION_TIMED_OUT in LTE5398-M904
Hello, I have a problem with my LTE5398-M904 for 5 days with SIM Orange and good external antenna. I had no problems with it for several months previously. 50% of page opened/refreshed take a long time and finally end with: ERR_CONNECTION_TIMED_OUT or broken site. I have to refresh the page many times to open it in all…
-
FWA510 WPS disabled but light still on
I have disabled WPS for both 2.4 and 5G but the light stays on - should this not grey out? The light is very annoying and I never use WPS. Any help appreciated.
-
Wo kann ich die FW für NR7101 laden
Wir suchen für den Router NR7101 die Firmware V1.00(ABUV.11)C0
-
FWA505 cant get anny conection
Hello, I just tried setting up my new router. I have the latest firmware. I did everything in the setupguide. It detects the Sim and i can enter the Pin. The Simcard is working on another lte stick but I can't set up a cellular connection.
-
NR7102 - Set eth1 interface speed manually
Hi, Is there possibility to set the eth1 interface speed manually? Getting following in the logs even if the up level switch is fixed 1Gbsp (about 10sec in the logs) esmd: Interface: eth1, Status: Down esmd: Interface: eth1, Status: Up, Speed: 1000, DuplexMode: Full esmd: Interface: eth1, Status: Down esmd: Interface:…
-
Request for Factory ROM and Firmware for ZyXEL VES-1608FA-35
Hello everyone, I recently acquired an old ZyXEL VES-1608FA-35 DSLAM (Bootbase Version V1.04, Firmware: V3.6(AYZ.5)b8), but unfortunately, the admin password is no longer known. I would like to perform a firmware reset to restore the device to its factory settings. To do this, I need the Factory ROM for this model.…
-
Nr7101 reconnect time
Hi, is there a reason why nr7101 keep too much time to reconnect to network? It's more than 60 seconds. Chateu 5g with same platform keep few seconds, 5 at max. My isp disconnect 4 times in a day, and 60-70 seconds without internet each time is too much.
-
NR5101 modem module firmware update
Hi - the NR5101 is currently using modem module firmware RG502QEAAAR11A03M4G which is now some what out of date. The latest firmware for the RG502Q-EA is RG502QEAAAR13A02M4G (as used in the NR7101). Can you provide the latest modem module firmware for the NR5101 please?
-
FWA510 Stopped Connecting to EE (UK)
We have 17 FWA510's which connect to the EE network and have been reliably working for months. Starting last night devices that restart will not reconnect to the mobile network devices that have maintained a connection continue to work. Our fleet of devices are on firmware version V1.18(ACGD.4)C0 We have a test unit on the…
-
It not possible to edit the apn for teh second Sim Slot NR7101. How does ist work?
-
NR5103E No newer firmware exists. The firmware on your device is already the latest version.
Hi, when I want to update the router NR5103E, this message appears: No newer firmware exists. The firmware on your device is already the latest version. Knowing that the firmware is V1.00(ACBJ.0)b12. Is there a solution or manual update?
-
Zyxel Lte 5398 più lento del cellulare ? possibile ?
ciao ! mi chiedevo se è possibile che il mio router con Sim dati Iliad navighi mooolto meno velocemente della stessa Sim inserita in un cell neanche recentissimi ( Oppo Reno 6 5g pro )... prova fatta a pochi minuti e nello spesso identico luogo... il router l'ho appena comprato x cui con configurazione base e auto bande...…
-
LTE7490 in Routing mode (multi-WAN setup)
Hello, I own an LTE7490-M904 LTE router and I am having troubles setting it up in Routing mode (IP passthrough is not an option). The target setup is as follows: LTE7490 acting as a router on fixed IP internal interface (i.e., 192.168.2.1) Multi-WAN router port configured with fixed IP (i.e., 192.168.2.2) using the LTE7490…
-
LTE3316-M604 VoLTE
I recently purchased this router but I can't get VoLTE to work, my telephone company (CoopVoce Italy) declares that the service is active. I connected a cordless phone, before dialing the number you hear the tone but then it remains silent and nothing happens. I also don't receive incoming calls, the SIM card is…
-
FWA710 IP Passthrough Configuration
Hello!! I have the FWA710 Outdoor 5G router running in IP Passthrough mode, connecting to a DECO x50 mesh. The router is running 5G SA and the signal is good (RSRP 72, RSRQ -2 SINR 24) but when I do a speed test the download speed reaches 500Mbps (+) for the first few seconds then drops (sometimes it drops to 10Mbps). For…
-
Receive NAK from DHCP server NR7101 to my router
I have NR7101 with ip-passthrought, 2 apns first the default and second VLAN interface. So my router take the 2 ips from NR7101 but the problem is my dhcp client drop the connection from release/renew and receive NAK from DHCP. There is 1,5 sec period time for this check so drop my connections when change the ips. Why this…
-
FWA710 losing connection after fast downloads
I recently bought myself a FWA710 and it have been working wonders so far. But as of today I've lost connection almost 10 times for the past 30 minutes. I can still watch Netflix and other streaming services since it doesn't use that much bandwidth. But whenever I download something on my PC I lose connection for 30…
