-
[NEBULA] Smart Mesh Nebula Clarifications
URL KB https://support.zyxel.eu/hc/en-us/articles/360007264960?page=1#comment_360000644060 Request Hi, at the beginning of the article it is explained that the mesh devices (AP without ethernet) must be within the coverage of the root access point (AP ethernet) "Smart Mesh works in a way that out of a multitude of…
-
Add Language French
Hi,Have you planned to add the French language to the NEBULA portal ? Thanks
-
[NEBULA] What are the AVP for Radius that accepts Nebula CC?
Hello all, I just need to know what are the AVP for Radius that accepts Nebula. Thanks in advanced,
-
[NEBULA] Registred NWA1123-AC Pro remains in standalone mode
Hello, I'm a newbie in Zyxel products and have a question regarding the AP. I have a GS1920 Switch and two NWA1123-AC Pro access points. The three items are successfully registered in Nebula, but one of the two access points remains "offline". There is no cloud connect active. When administering as standalone, everything…
-
[NEBULA] VPN Alerts but tunnel is up and active
When we activate the VPN alerts we receive an alert about every 15 minutes. However, the tunnel is up as we have been running a ping monitor to test traffic. This is only happening at one site. Others are working and alerting like normal, How does the alert test tunnels? I did see the post about subnets and making sure the…
-
[NEBULA] How to upgrade firmware NAP102?
I just installed my NAP102 AP. It's working but the cloud environment reports: "Configuration status: Not up to date (Require firmware upgrade.) Firmware: Not up to date" Screenshot below: How do I update/upgrade firmware on my Nebula NAP102?
-
[NEBULA] The 10G Multi-Gig Switch XS3800-28 supports Nebula Cloud now!
Hi all: We are excited to announce that our powerful 10G Multi-Gig
Switch XS3800-28 now supports Nebula, with 1-YEAR Pro-license! With this new
10G aggregation switch joining the Nebula family, you can now setup the entire
cloud network and experience the centralized network management, zero touch
provision, and many more…
-
[NEBULA] NSG WAN with PPoE and VLAN
Hello, I will have to connect a new site with a NSG100 :) . On this site, Internet will be provided with VDSL2 technology. According to the ISP, in order to use bridge mode, I have to set up my router with these parameters : * connection type : PPoE * a username * a password * a VLAN ID : 835 Does the NSG100 can be set up…
-
[NEBULA] SitetoSite VPN Disconnecting every 30 Seconds
Site to Site VPN between NSG100 and USG60 was working fine for several months, starting last night it began disconnecting/reconnecting. Monitoring from the USG60 side shows it disconnects after 30 seconds, rebuilds the tunnel then disconnects again. No changes had been made prior to this issue. In Troubleshooting we have…
-
[NEBULA] Any automation / Backup software for zyxel products?
Afternoon, I manage 10 zyxel USG's and a few switchs. Im looking to imporve my change control / backups Does zyxel have / recommend any software / method that would automate config backups? id also be interested in anything that can generate a alert on config chage. my question inspired by this -…
-
lldp transmit interval
hello is it possible in a gs1920v2 switch connected to nebula to modify the following parameter: lldp transmit interval from 30 seconds to 8 seconds
since nebula it does not seem possible but from the web interface of the switch ?
-
[NEBULA] Renew/Buying licenses
Where do I purchase security licenses for the Nebula once the trial expires? Thanks
-
Note and task
I would like the possibilities for write some notes and tasks for nebula control center and orchestrator
-
[NEBULA] Cloud authentication
I add a new user account for authenticaition but not work.
-
[NEBULA] Zyxel NWA1123-AC HD Poor Throughput
Been using the NWA1123-AC HD for some time now, but the performance on AC is not that great. My personal laptop has a good link, but performances is around ~300Mbit/s measured with iperf. I do not have this issue on competitor hardware. I am aware of the issue with certain built-in functions, that need to be disabled to…
-
[NEBULA] NWA1123 & Nebula
I'm not a seasoned expert with Nebula and there are a few things I don't seem to be able to figure out. I one one site with a NWA1123 configured and showing in Nebula. That seems OK Today I added another site with two more NWA1123. Those AP's don't seem to be showing up in Nebula. Does it take a while for Nebula to…
-
[NEBULA] Feature Request: Port select
HiWould it be possible to search for a range on ports like port 1-10 on selected switches to make changes to them all at once "batch configuration" If it is already possible, please let me know!
-
Create new admins in NCC
We need the ability to create new admin users that can have access to all or some organizations depending on what access they need. Similar to how the "Owner" privilege is currently. Presently, we have to create the same users for each Organization.
-
[NEBULA] AP not getting recognized
I have the NWA1123-ACv2 Access Point. When I plug it into a POE switch at work it correctly connects to the network and works like an AP. When I take it home and plug it into a non-POE switch with the power supply attached to it, it does not work. Thoughts Thank you Kevin
-
[NEBULA] Use an insightful security report to protect your network
In
this digital age, IT administrators often face significant hurdles when it comes
to protecting their organizations’ digital assets and productivity against
ever-evolving stealthy security threats including phishing attacks, viruses,
unauthorized applications, and blocked websites. A lot of times, they would
have to…
