-
NSA325 v2: relocating swap space to an external USB storage?
All - I just came to mull over relocating the device's swap space to an external USB storage. But I am not yet entirely sure whether it's a good idea. Or really a bad idea™. Here is where I have stopped: Throughput is key! The HDDs are connected to the NSA v2 via a SATA II bus. SATA II according to…
-
NAS 310 & 320 NAS Starter Utility and firmware needed
I have a NAS 310 & 320. Please send me the link or files to download the NAS Starter Utility and last firmware for these units. Thanks
-
NSA310 - Jumbo frames settings are not shown in the TCP/IP screen
I know the NSA 310 is a discontinued product, but maybe someone did experience the same issue. As per from the subject, jumbo frames settings are not shown in the TCP/IP screen of my NSA 310 configuration dashboard. Such settings are clearly shown and descripted in the user's manual. The installed firmware version is…
-
need to change the IP address of a NAS326
In moving and getting a new ISP provider I need to change the IP address of my NAS326 formaly set to the IP mask of 192.168.0.1 with a addrss of 192.168.0.150 the new provider's router has a address of 192.168.1.1 tried to change this many time with only greated with a error after entering the address information.
-
NSA310 spare parts and are the NSA310 disk is readable on NSA320
Hi, Yesterday I had a problem and when I took my nas to local shop for fan cleaning the guy had dropped the unit and the plastic piece interfacing with the hard disk was splir from the PCB. TRied to solder but have some problems, namely, the HDD status lights are nor blinking anymore and they are on solid. I've got the…
-
Nas326 password reset
I have lost my login informations. I tried to login via LAN to my Nas but it only says that username or pasword is incorrect. How can I reset password. I found some guide which told to press reset button 3 second. Would this work and can i be sure that my photos are still in safe? Please help. #NAS_June
-
using rsync on NSA325 v2
Hello everyone, I have a Zyxel NSA325 v2 and I am trying to download backups from a Linux server using rsync. However, it seems that my device does not support rsync. Is there any way to use rsync on my device, or would I need to change the main OS to a Linux OS to be able to use rsync? Any help or advice would be greatly…
-
NAS 326 V2 Rebooting continiously
I discovered today that my NAS 326 V2 keeps in rebooting continuously.it is configured with static ip address and 2 hard disks.Please help with troubleshooting and recovering NAS. Thanks
-
Is there any other app alternative to zCloud?
I have the NAS326; zCloud works fine, it does what it's supposed to. As a music player, it sucks, no options. Cant even save a playlist. Does anyone know of another android app that can connect over internet to NAS326 for audio streaming? I am not concerned with the video/photo options. Thanks!
-
Zyxel NAS326 - fan's speed problem
Hi I have a new Zyxel NAS326. The fan's revolutions make me nervous. What she wants changes her speed 970 -> 1000 -> 970. At night it is very audible. Would not it be better to make corrections to the software that allows you to choose whether the fan should work in silent mode or in normal mode. Or harmonize the fan speed…
-
Zyxel 542 NAS - Hdmi to USB connectivity
In the product description of the Zyxel 542, it mentions connectivity directly with HDMI (apparently to your smart tv). There is no such port on the Zyxel, so I assumed it needed a USB to HDMI connection. I have connected to the usb the proper adapter and followed with an HDMI cable to the TV. When I try to connect to the…
-
NAS 542 - double ethernet connection
It seems to me that when connecting both RJ45 to the router, the smart TV disconnected quite often from one IP and connects through the other, resulting to the loss of the smart icon on TV that connects it to the NAS. Do I need to setup both RJ45s on the same IP? or is there another option to configure that will cause…
-
Remove an internal HDD of a NAS540 and install it on a external USB case
Hello, if I remove a basic volume HDD from a NAS540 and put it on a external USB enclosure and connect it to another NAS540, how can I mount it to copy the files?
-
NAS326: Install and run Kodi App natively
I am looking into installing Kodi on NAS326 natively (if possible) instead of using NFS method. Any helps will be greatly appreciated.
-
Move harddisks from NSA325 to another NAS?
Hi, I have an old NSA325 that does not work any longer with WIN11, I can ping the NAS but the Windows explorer cannot connect. I've learned that it is an issue with SMB1, but my NSA325 does not support anything else. So I have to replace the old NAS with something new. What would you recommend? And: is it possible to move…
-
NO printer server on NAS542
Hi, I've connected my printer (Brother HL-L2300D) and although I connected to the NAS, I have no Printer server under Control panel - Serrvices tab. FW version: V5.21(ABAG.9) Anyone has any idea what can be wrong, please? Cheers edit: I tried to unplug the printer, restart the NAS and then plug it in again but there is…
-
How to boot a NSA325V2 from USB
Hello, I wanted to reactivate my NSA325V2 for some testing. Is there any way to start the NSA using an USB-Stick? I built the USB-sticks using unetbootin using different configurations and tried all three USB-ports but nothing worked. Thanks in advance, Norbert
-
Beginner want plex on Nas326
I have never set up a nas before but I would like to put plex on my nas and have no idea how to get it or install it I got the system up and going just need to install plex.
-
Nas542 Network problem
Hello. I bought Zyxel Nas542. latest software version after using for a while V5.21(ABAG.9) I upgraded. I can't get pppoe connection after upgrade. It does not accept the process of reverting to the old version. I'm waiting for your help.
-
Package for Zyxel NSA320S
Hello, yesterday a friend offer me a Zyxel NSA320S, as a gift, but inside i don`t find a list of package, and i can`t find it on the internet. Where can i find this list of package? Thanks.