-
Map network drive on NAS540 remotely?
How would I setup file sharing on my NAS540 to allow remote clients to map as a network drive?
-
Internet access-cloud user
Always problems... :( For cloud user (user via Zyxel Drive android app) I check boxes - READ ONLY for all folders. I do not want to someone hack password and change my files (that already was happened). But after I connect from app to NAS, wiew some files and connect off in NAS control panel: cloud user now hawe read/write…
-
Can't connect to NAS326 using ZyXEL Drive
All settings were made in MyZyxelCloud, but I did not get the expected result.
-
Restoring files from backup
I can't seem to restore my files that are backed up on disk 2. Disk 1 suffered from a ransomware attack, disk 2 is using separate username and password. The back up files haven't been modified since the back up. When running the restore task either by file or back up action both fail. Is there any other way of recovering…
-
User Disk Quota Size Limits on NAS540
Hello I have NAS540 with four (4) 4.0TB (nominal size) HDDs, set up in RAID5.All four are put into a single Volume built directly on RAID5, giving me 10.82TB usable space. Now, I have two (2) school age users.The idea is to divide that overall space between those two users -- assign about 8TB share to User1, and the rest,…
-
No (Zip, Zero, Nada...) User Storage Quota Allowance.
This may have been asked before... but... I am setting up a family file dump on a NAS540. Unit has four (4) drives, one (1) disk group using RAID5, sub-divided into three (3) Volumes on Disk Group (basically a single "dedicated" Disk Group per user). There will be three (3) users (1 admin + 2 "regular" users). Here's the…
-
Hacked NAS326
I dont know how (I have a very strentgh password, and last firmware instaled)...but someone haked my NAS326. All files in all folders are crypted and in every folder there are a txt file !CHECKMATE_DECRYPTION_README with instructions for paying 560USD for uncrypt.... Is there are some solution for saveng files? Thank you
-
Nas542 updated for version V5.21(ABAG.9).
A nyomtatószerver azóta eltűnt.
-
rsync over SSH (NSA320 to NAS326) limited to 4MB/s due to ssh cipher cpu usage?
I'm trying to do a large rsync between two NAS, a 320 and a 326, noticed it's very slow. I can see ssh using about 80% cpu on the source box (the 320) (rest is rsync). I can't seem to find a faster cipher compatible with both boxes. Arcfour doesn't work. Can't disable encryption completely? Any tips please? This is going…
-
Set up of VPN in IPAD Ios system for Zyxel NAS326
Hi all, Does anyone know how to set up the vpn of my ipad for Zyxel NAS326?
-
NAS326 Problems
I have a NAS326 had a folder I created, My Documents, which I had mapped to a drive letter. Two days ago the nas326 started beeping and of the led for drive 1 was blinking. Error message showed that the mapped drive was not available. I got into the nas326 clicked on Storage Manger and it showed there was a problem and…
-
freeze NAS542
Hi ! after playing with debian I get a freeze NAS (connected the console.The NAS keeps trying to boot from /dev/nand0.kernel2.bb and hangs externally. I break the loop from the console and type "bootm /dev/nand0.kernel1.bb" . the first Linux is loaded, but also with nand errors, and then a reset by watchdog follows.But…
-
Disk Replacement - NAS 540
Hi, I changed the drive in the NAS. The new drive works, there are no problems, but in the NAS it is incorrectly recognized when it comes to capacity. The new one has 8TB. How to resolve the issue of incorrect display of disk size?
-
Nas 540 broken after power-outage
I had a power outage and after this incidend my NAS 540 kept beeping. Then i wanted to try to fix the NAS by using Mijzelf's RescueSticks (Thank you at this point for all the amazing work you are doing here). After that it didnt boot at all. On debugging with a serial connection i was able to see that i get a "Bad header…
-
Upgrade disks in NAS320S
I have a NAS320S and want to replace the 4tb disks with 8tb disks ... I don't want to save what lingers on the 4tb drives because that data has been copied off ... I simply want to replace the 4TB with the 8TB drives ... Can I simply shutdown the NAS, remove both old (4tb) drive, then insert the 8tb drives and power up the…
-
Transmission has stopped (NAS 326)
Hello; I have the Transmission app on my NAS 326. However, it doesn't work for a couple of days. Any solution for this?
-
Will NAS540 and APC 700VA with PowerChute USB port support Auto Shutdown?
Hi I'm considering to buy new UPS for my NAS540 model and just found out the Auto Shutdown function when the UPS capacity lower than designed percentage and I found APC 700VA model with PowerChute USB port so will both devices are compatible? can I use Auto Shutdown function?
-
NAS 325 auf 2*4TB aufrüsten
Hallo alle, ich wollte meine NAS325 auf 2*4TB aufrüsten. (Bisher 2*1TB). Erste Platte raus und 4TB rein. Volumen repariert. Hat alles funktioniert. Nun die zweite alte Platte getauscht, aber das NAS sagt Volume down . Kein Möglichkeit zum Reparieren angezeigt. Jetzt habe ich beide alte Platten wieder eingebaut und Volume…
-
NSA325-V2 & macOS - very unstable
I'm trying to copy files from my Macbook Pro (16-inch, 2021 with M1 Pro processor and macOS Monterey version 12.6) to a share on my NAS but the process aborts after some time (it manages to upload about 1GB). All mounted shares disappear and I have to remount the shares again. Anyone knows how I fix this? Everything works…
-
NAS542 Raid1 config, HDD:s not accessible
Hi, I think I have a serious problem with my NAS542. One day it worked fine and the next day it was not accessible. There is a crackling sound from the HDD in position 1 and the server constantly tries to reboot and shuts down and starts all over again. The HDDs never show up on the NAS542 Desktop so I have not been able…
