Trying To Use Two NAS326 in My Network
Leo
Posts: 2 Freshman Member
I'm having trouble getting a second NAS326 to be recognized by my workstation. I've followed the 3 steps then clicked the Start button on the screen. I press the button within 5 minutes displayed on the screen. I can't get the device recognized. I never get the Congratulations or Admin page button. Are there any special steps to adding a second NAS326? If not, how can I tell if the second NAS326 might be defective? I have both NAS connected to the router via a switch.
#NAS_February
#NAS_February
0
All Replies
-
You should connect one, and change it's hostname in the webinterface, reboot it, check if it's recognized at his new hostname, and then add the second. Having 2 devices with the same hostname is asking for trouble.how can I tell if the second NAS326 might be defective?
By connecting it alone.
0 -
WHAT IS A HOSTNAME EXACTLY? WHERE DO I CHANGE IT IN FIRST NAS WEBINTERFACE?0
-
To change the name of the NAS. Click "Control Panel" under "System" there is an option for "Server Name". Rename the default Server Name "NSA326".Save the change and reboot the device.There should be two NASes online as they should have different server names.0
Categories
- All Categories
- 347 Beta Program
- 2.1K Nebula
- 114 Nebula Ideas
- 77 Nebula Status and Incidents
- 5K Security
- 44 USG FLEX H Series
- 246 Security Ideas
- 1.2K Switch
- 65 Switch Ideas
- 901 WirelessLAN
- 33 WLAN Ideas
- 5.8K Consumer Product
- 204 Service & License
- 326 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.8K FAQ
- 831 Nebula FAQ
- 401 Security FAQ
- 219 Switch FAQ
- 190 WirelessLAN FAQ
- 45 Consumer Product FAQ
- 136 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 71 About Community
- 61 Security Highlight