-
NAS326 create FTP user
Dear I have enabled FTP in NAS326 and can connect with users admin or backup (which is a special user having r/w access to only one specific folder), but cannot browse or even see anything on the server. I would appreciate a guide to manage/create user(s) for FTP usage. Access will be only from within house network (LAN)…
-
NSA325 - rebuilding RAID 1 3TB disks (75% full) - gonna take weeks!!
I have a NSA325 v1, with firmware 4.81 I noticed that the RAID was "degraded" a few days ago, and it let me just "repair" it, which I clicked at about 8pm on 25/12/2021 its currently (18:36 26/12/2021 - ie about 23 hours in) on 5.6%. It is going up, but very slowly, and at this rate it will take about 2 weeks!!!!! It seems…
-
"Failed to delete" on folders
I am trying to delete some folders using the web file browser. All the files were created in Windows. I repeatedly get "Failed to delete". I can delete them from Windows but we are talking terabytes of data in tens of thousands of files so it takes forever.
-
NSA325 v2 - Browsing with Windows Explorer
Hi, I have had an NSA325 v2 for some time and use it to store my photos etc. I seem to recall I used to browse the contents using Windows Explorer - by simply typing the IP Address of the device in the Windows Explorer Bar. Now when I do it I get the Twonky Media Server which is not that great from browsing thousands of…
-
Overview shows "Green Health" but Disk2 shows "Bad Health, Status: Danger" !!
With reference to my newly bought NAS326 with 2 x Seagate IronWolf 4TB. Out of curiosity I checked the status of my Raid1 (used default setup during installation) and found that the Overview showed "Green" status on both disks, BUT when I looked into Disk2 it showed "Bad, status: Danger"! Question: How to interprete the…
-
Photo files renamed when back-up'd - NAS326
With reference to my newly bought NAS326 with 2 x Seagate IronWolf 4TB. ALL photos (approx. 1200000) was renamed when doing a full backup a Ethernet based network!!! - Photo "210313_3895.dng" had been renamed "210313_3895 (2021_12_01 20_15_00 UTC).DNG" - Photo "IMGP0593.JPG" had been renamed "IMGP0593 (2021_12_01 20_15_00…
-
NAS326 SSL Certificate Import
Hi, Ive generated a .csr via WebInterface and validated it with certbot, at first Sight everything seemed to be okay, but after the NAS said "Restarting Web Services" it displayed: 500 Internal Server Error The server encountered an unexpected condition which prevented it from fulfilling the request powered by CherryPy…
-
Upgrading drive
I have a NAS326 with a 4TB drive and a 1.5TB drive setup as Basic drives. My media is setup on the 4TB and I'd rather not change everything everywhere and mess with that. I want to replace the 1.5TB drive with a 14TB drive, move the data from the 4TB to it, and then have the 14TB have the same name as the 4TB had (giving…
-
Installing Arch on a Zyxel NAS540, like this guy did with Debian?
Hello everyone,, I've been using Arch for a couple of years. Been using it heavily on multiple devices but haven't looked too much into kernel website building and such...I would like to replace the stock firmware on my Zyxel NAS540 with my own custom Linux. I found this…
-
Why does Zyxel only allows Passwords up to 14 Characters?
Hi,i have a question. I have the Zyxel NAS542. Why does my Zyxel NAS only allow Passwords up to 14 Characters.That is not safe at all!Synology allows Passwords up to 127 Characters!Why does Zyxel has this restrictions. It does not make sense to me.And if you expose your NAS to the Internet you dont want to save it with a…
-
NAS542: How do I establish serial connection?
Hi, I don't exactly know what went wrong... I booted a debian sd card, flashed the kernel and everything was working fine. I've used this image: debian-nas-bullseye-21.218-armhf.img.gz and the firmware: linux-image-3.2.102-1-nas5xx-armhf.zip Then, after a few reboots the system seemed to start, but ethernet didn't come up…
-
NSA325v2 PlexMediaServer
I want to install PlexMedia Server on my NSA325v2 but i need PlexMediaServer-0.9.16.6.1993-5089475-arm.bin
-
NSA325v2 Backup from A to B
Hallo zusammen, ich habe 2 Zyxel 325v2, jeweils mit 2x4TB im Raid1Ich habe auf meiner Haupt NAS per BackupPlaner einen Job eingerichtet, der mir Wöchentlich die Daten vom Haupt Nas auf mein Backup Nas sichert.Wird beim Backup jedesmal der komplette Inhalt auf dem Backup Nas gelöscht und erneut von A nach B kopiert oder…
-
Problems changing admin password NAS540
I have changed the admin password of a NAS540. Now I can not enter through the web but if it allows access by SSH and SMB. How can I recover web access? #NAS_Mar_2020
-
I am using NAS540, the Mobile apps are crashing
The Mobile app 'zcloud' is crashing when I tried to set up instant upload.
-
NAS540 degraded disk, tried repair, now volume down
I got a disk in the RAID 5 array, that went offline with a lot of "command timeouts". After a reboot of the NAS, it came back online, and teh NAS suggested that I repaired the volume. So I did that, and now the volume is down! there have not been anymore "command timeouts" on the problem disk. I'm hopping someone has an…
-
NAS542 thumnails generating
Hello, i have nas542 with latest firmware. I'm trying to turn off generating thumbnails. I don't have any services other than myZyXELcloud-Agent installed, and even though I have disabled thumbnail generating in myZyXELcloud, generating is still running. Restart didn't help.
-
NSA325v2 BackupPlanner - Install Failed
I want to install the BackupPlanner on my NSA325v2 but it comes an errorInstall Failed: Download Package BackupPlanner failed and not available one in local shareCan Someone help me
-
NAS542 connection problem
I have been previously able to access NAS542 that is located just next to me. I have an ethernet cable from there to a switch and my PC is connected to the same switch. I have tried the https://findme.zyxel.com/ using Chrome and that works, it responds to me pressing the copy/sync button and says "Congratulations! Your…
-
Can no longer connect via SMB (Port 445) to NSA325-v2
Hi, for some reason I can no longer connect via SMB (Port 445) to my NAS (NSA325-v2) --> same issue with several windows 10 laptops. I've updated the NAS to Samba 3.6.25 to support SMB2. To be on the safe side I've also activated SMB1.0 for the windows 10 laptops (control panel, turn on windows features, SMB1.0) When…