-
NAS540 RAID5, replacing drive, no repair option
I have three NAS540s, all with four 2TB drives. Each NAS is configured as one big RAID5 volume. I've done single-drive replacements before and I've always been prompted to repair the volume. As I understand it, with RAID5 I should be able to upgrade all the drives one by one, repairing the volume again each time I swap out…
-
AuroraSyncBackup is not find my Aurora Cam!!!
Hello everyone, I use 9 AuroraCams in my pharmacy. I have two NAS326 and one NAS542; NAS326s are just records.. One of them NAS326 has 4 cams, other has 5 cams for records backup.. There was't recording problems last month but this month no any records.. All system has just one account and I cheked it.. I instaled…
-
NAS326 & ipcam
I purchased the new nas326 (Firmware version: V5.21AAZF.8) and I want to use it to save images captured by an ipcam via ftp protocol as I did with the old NAS. I created a user (e.g. ipcam) and associated it with a folder (IPCAM) on which it has full rights. If I run the tests I get the error 553, that is, it is impossible…
-
Network
I have a 326 NAS and U want to brows my network from my PC and when I click the NAS on the network it opens in Monky media app. how can I just open it in the file explorer? #NAS_July_2020
-
NFS server broken (possible RPC issue)
Using the ABAG.5 firmware on a NAS542, i installed NFS 1.3.0zypkg007 and added a share. This could not be mounted - macOS gave the error "This file server will not allow any additional users to log on", both when using v4 and v3. So, i ssh'ed into the box, and found the problem is much stranger:…
-
Speed NAS542
Hi, I have a Zyxel 542 NAS containing 4 HDs of 1 TB each. I want to replace them with HD of 4TB and therefore, I copy all the data from each hard drive to my PC. I have a 1 Gbs network. Data copying is very, very long. I NEVER NEVER exceed 20 MB / s. Is this normal?1 TB HD is 7200 rpm.It will take me whole days to simply…
-
Adding external drives
Is there a disadvantage to add external drives VIA USB 3 for additional storage? #NAS_July_2020
-
500 Internal Server Error on SSL
Hi to all, i need to upgrade my ssl certificate but when i try to reach system setting in ssl section i have this error, no reference in log...i have rebooted it and problem persist....how can i resolve?and how i can check what cause it?? #NAS_June_2020
-
How to manually mount disks from terminal?
I use 4 zyxel 542 NAS systems to backup a lot of photos. Because I want to have one set of offline backup disks at all times and rotate these periodically, I have set up my system in such a way that for ever master, e.g. masterA I have two backup drives backupA1 and backupA2. One of those is always in storage, the other is…
-
NAS326 and set access to smart tv
Hello.I have two Samsung smart tv in my network (by wifi). I try set access to NAS data but I don't see tvs as users, so i can not set privileges. Now I have full access to my NAS by any TVs, but I want to set access denied for one of them. ps. I discovered if I turn on twonky media server that all TVs can see share…
-
NAS 326 lack of access
Mam serwer NAS326 działał dobrze, ale po włączeniu wczoraj jest widoczny w sieci, ale nie ma danych w folderze, ponadto nie mogę się zalogować przez stronę, tylko dostęp za pośrednictwem ssh działaczy jest jakiś sposób, aby działał bez utraty danych?wersja oprogramowania firmowego v5,21 (AAZF.5) #NAS_Mar_2020
-
NSA310
Could someone kindly explain Sync vs Copy? I have files stored in Music on the NSA and copied them to an external USB drive using the 'Copy' function. I have since added new files on the NSA and need to update the USB drive. How do I best perform an Update please? Thanks, Jeff #NAS_June_2020
-
NAS326 Unable to pair device
So I just tried to pair my device via the zyxelCloud. On https://mycloud.zyxel.com the nas is found but when I try to pair the device, as soon as I click the button on the nas it says "device not found". The nas has internet access, ping worksDNS settings are correctRouter allows UpnpManually set a portforward on the…
-
NAS326 - Don't enter in sleeping mode
Hi, for the problem in title i have follow this discussion https://homeforum.zyxel.com/discussion/comment/3722#Comment_3722 but without success. I have tried to make hard reset. Nothing Leave NAS without LAN cable after hard reset. nothing Also without LAN cable, i ear the hdd in write/read "movement". I suppose it is the…
-
No possibility to configure NAS
Hello,I'm trying to configure my NAS326. I have to harddisks connected as RAID1 disk.When I'm logging in using browser (any browser, few computers) - I can see no icons to set anything.I can see them - when I pull disks out :( I've upgraded firmware to newest version, but it didn't help.But I can see and connect network…
-
Zyxel Drive stopped connecting to my NAS
Hi All, I am not sure what I have changed, if I have done any, but the Zyxel Drive app stopped connecting to my NAS520 at all. My NAS is on my latest version V5.21(AASZ.4), I restarted it, I made sure that the uPnP enabled on my router, I have removed the NAS from my myZyxelCloud account, and I am not able to add it back.…
-
NAS542 Unable to map UPnP port
Hello, I'm trying to enable HTTP on my NAS542, but it fails. Nothing happens, if I try to do it through MyZyxelCloud, it says "fail". Only WebDav is enabled, everything else is disabled and I cannot enable any of them. I want to have access from outside the local network and I guess HTTP should be enabled. I called my…
-
Hardware flaw in NAS320 units
I was supprised to find one of my NAS32 boxes with a flashing HD lite.It refused to power down on the button. so suspecting external hackingI decided to pull the plug on te power cable. Next day it refused to power up on the button. search for ideas I stumble across the 0day warningThis was even bigger shock, How could it…
-
NAS326 problem - part 2 - help is needed - Volume is down
Hello all, and especially @Mijzelf You probably know my problem with one faulty disk on NAS326 (linear, jbod). Look here: https://homeforum.zyxel.com/discussion/3827/nas326-problem/p1 Problem is how to "assemble" NAS volume (or array back) without losing data. So, I managed with ddrescue copied 99.999% of that faulty disk…
-
NSA320 button broke need to restore data from the disks
Hi Sorry I'm new to this! I have a NSA320 and when i turned it on the power button broke. I bought an NSA326 thinking I could put my disks in that but I have been told by Zyxel that they won't work and there is nothing I can do. The data is too important to me to lose it and the disk were working fine. I've seen various…