-
NAS542 extremely slow write speed, CPU 100 %
Hi, I have a NAS542 set up in RAID5 with 4x8TB disks. When I start data transfer from a USB3 disk to the NAS, the write speed is extremely low (9-10MB/s). The CPU is almost constantly maxed, Tweaks by Mijzelf show that the load average is around 6, which is horrible. When I tested it as JBOD, the write speed is a little…
-
Possible to recover deleted data from NSA325 v2 without RAID?
Hi everyone, I wanted to create a backup using rsync and pointed to the wrong target directory. Now rsync of course started to delete the data in the target folder. Nothing was overwritten. Just deleted. Question now is if there is a way to recover this data? Normally I would hook up the drive to my notebook and use Recuva…
-
[NSA320] Install open SSL / Entware opkg command not found
Hello, I get a SSL error when trying to pull something from Github. Is seems I have to upgrade openssl. I tried slacker but it only has version 1.0.0 available. I also have entware installed but when I use the command opkg I get an error: -sh: opkg: command not found. #NAS_Jan_2020
-
NAS 542 strange issue
From time to time my Nas blinking with a status indicator in when it happens I cannot connect to the has, I don't know what it means, I tried to nothing to do, after 24 hour nothing changed, I just manually switched off NASand after that switched on, and now it works. I would like to know what happened and what behavior…
-
Can't access SMB on NAS326 using windows 10
Hello. This is really frustrating, I have enabled SMB 1.0 in windows 10 but i'm still unable to access it. \\server\path\ - Invalid (request times out) ip/path/ - Invalid (request times out) I can see the device as a network device and confirm it's IP. Accessing it through as a network location in "this pc" only presents…
-
NAS326 suddenly no longer has access and folders gone.
Good Morning,a few days ago I couldn't get into the interface. The page starts but login is not accepted. There is no mistake. If I go over it via FTP then all files are gone.I've already done the rest. Kind regards, Daniel #NAS_Jan_2020
-
Stuck in bootloop.
Hi. My nas540 is beeping ones and stuck in bootloop. First I thought one of the disks was damaged but when I changed one of them it beeps many times and then reboots, all the time. I can't even logg on to it. What's wrong? #NAS_Jan_2020
-
NAS540: Volume down, no option to repair
Hi all!I have a NAS540 with 2x 250GB HDDs in slot 3 and 4 in RAID1. I was going to replace them with a single 2TB drive.After making a backup of the data to an external drive I stupidly enough I pulled out the old drives, disregarding the warning tone that started to sound, and put in the new disk in slot 3. Then I went to…
-
Re: NAS540: Volume down, no option to repair
-
Getting authority to access files on the NAS
I have an NSA310 with an attached additional USB disk drive on my network. Whenever I try to access the NAS drive from Windows Explorer running on one of my network PCs (e.g. to create a new folder on the NAS), it tells me "You need permission to perform this action". It does not provide me with any way of obtaining…
-
Plex last Version that work with NSA 325v2
Hi, I use Plex in Version 0.9.16.6 is there a newer one witch work with a NSA 325v2? #NAS_Jan_2020
-
Is ZCloud available for NAS320S?
I do not see the Z Cloud agent included in the packages on my NAS320S, nor can I find it anywhere else on the drive or in the settings. Is it possible to use Zcloud with the NAS320S? Also, does anyone know if more than one NAS can be accessed from MyCloud? I have a NAS326 at home that I access through my phone app, and I…
-
Zyxel NAS542 OFFLINE USE?
Hi is there any way to use the NAS542 offline as an external raid by usb-cable or directly connected to my PC via LAN connection (I am working offline without any router nor server)? THX #NAS_Jan_2020
-
Reconnect to a mapped drive at windows login
After restart of windows the mapped drive is not accessible. I have checked the box when i mapped the drive but still not working? It is a NAS326 #NAS_Jan_2020
-
NAS 326 - FTP - sharing existing folder
How to share throught FTP transmission download folder? How to share folder which isn't listed in "shared folders" in "control panel"? #NAS_Jan_2020
-
Copy speed on NAS HDD between folders very slow
Hi guys, I seek help with my terrible transfer speed on my NAS326. I have decent download speed to the NAS, 50-100 MB, then good speed when uploading from laptop to the NAS but very terrible when i copy a folder from NAS to NAS, same hard drive. I only get 700kB Basically I have folders on NAS by type so lets say i have a…
-
Get space occupied per User/Group or Share
The web page shows only the total of occupied space.How can I get the space grouped by user/group or share? #NAS_Jan_2020
-
Nas326 java install for jdownloader
Hi I tried to install java on my nas326 but no success. I need it to install jdownloader for premium downloads. I know there is pyload but it can't unrar files with few parts. Jdownloader have good archive extractor and simple remote controller from any internet connection. I try this tutorial…
-
NFS on NSA325
I followed the tutorial and I have shares showing in my NSF file in the NSA browser. When I add my NFS file as a source in KODI the sub files, which show as populated in the NSA browser, have nothing in them. I am totally uneducated when it comes to Linux, so if there is something I have to do using it on the NSA please…
-
Rsync with NSA325v2 Multiple Shares Best Practice?
I'm running a NSA325v2 as HomeNAS in my local Network, and just bought a cheap 2nd one for Backup Purpose. Both with two JBOD (but different HDD) each, my Main-NAS with multiple Shares. I configured a Rsync-Job for Testing, and it works like a Charm. Now im wondering, what would be the best Strategy for regulary…
