-
NSA Starter Utility EOL Announcement
NSA Starter Utility EOL Announcement Zyxel Networks has announced that the service below is in the process End-of-Life (EOL). Zyxel
Networks announces that the service below is in the process for End-of-Life
(EOL). EOL Service: NSA Starter Utility for NAS326, NAS540, NAS542 End of Service Date: 29-July-2022 Alternative…
-
[Important Announcement] End of FTP Service Support for Home NAS Series
This discussion has been moved.
-
NSA325-v2 - How to reset configuration/packages on NSA325 v2 without losing data?
I’ve used my NSA325 v2 for years without issues, but a recent power failure caused some stability problems. The NAS is back online, but Samba (SMB) fails to start automatically. I currently have to start it manually via PuTTY. I suspect the boot process is hanging because it’s searching for old SMB2 / EntwareNG packages…
-
NSA310 configuration page
I have a NSA310 which is still working fine for me. It streams video and i can mount shares in WIndows 11. My issue is I can't find how to get to the admin page any more (e.g. where ypu can create shares etc). If I put in the IP address it does not connect. I can get to a twonky home page using port 9001 but does not have…
-
NSA325-v2 - Issues installing Entware-ng repository - install SMB v2
Hi all, On my NSA325-v2 NAS I have successfully (re)installed the Mijzelf Meta Repository. I can see all the packages from both (fw4_stock and fw4) repositories listed. Now I am trying to install the Entware-ng repository. My final goal is the enable the Samba replacement for the SMBv2 protocol. From the Entware-ng…
-
CHANGE PHP IN PHPMYADMIN IS POSSIBLE??? (FFP-METAREPO-UPDATE WEB_PREFIX)
Change dir /i-data/ddd8f3c9/.PKG/phpmyamdin/php In this dir /i-data/ddd8f3c9/.PKG/ffp/ffproot/ffp/DIRPHP(8.0-FOR MY) And modify all file php in last verisn to load in php new Note: NAS326 LAST FIRMWARE 5.21 ECC… @Mijzelf What do you thinks?? Ps: I follow this link…
-
How to open NSA325 v2
Hello. NSA325 v2 : the On/Off switch is loose. The fixation must probably be glued again. My (easy?) question : how to open / disassemble the outer plastic case. There are 2 screws underneath, 4 at the back (seems for the ventilator), but the case still cannot be disassembled.
-
Nas 326
Scusate tanto. Ho aggiunto un secondo HD sul mio nas ma non riesco a cambiare il raid sul precedente Volume 1. Seguo la procedura ma non va a buon fine. Qualcuno può aiutarmi per favore?
-
Where can I download the best repository for nas325 v2 with firmware 4.81? the ZYPKGS have 0B Thanks
-
NAS326 check internal drives
I've been asking this question for months now but I got no answer. My last try was the old zyxel forum forum.nas-central.org which is now closed. The nas326 has no option for internal disk check on the web ui. So I've been trying to find a method to perform a disk check on the internal drives because there were some power…
-
is there software for Ubuntu?
looking for replacement of setup CD for NSA325 v2
-
What is the main board of the NAS320?
-
Repository not visible in NSA325-v2 FW 4.81
Hello everyone, I'm trying to retrieve the apps repository for this NAS but the list comes empty all the time. I went directly to the Zyxel FTP and all the apps are there BUT in a different folder , the FW 4.80 folder instead of 4.81 like it should be, but the last doesn't even exist. Is there any turn around to this? A…
-
NSA325 unable to install metarepository
Hello. I am new to the forum and my knowledge in linux/nas systems is restricted. I have an old NSA325 which I tried to update using the metarepository as I wanted to have more options in the available apps. After download the web_prefix file and retrieving the list from the internet I am on the following screen and I am…
-
"Power On Schedule" issue on NAS542
Hello I use two NAS Systems. One NAS326 and one NAS542. Both NAS systems are not needed at night. Therefore, Control Panel - Maintenance - Power - Power On/Off Schedule has been set to shut them down automatically. This works without any problems on both systems. A Power On schedule has also been set for restarting the…
-
NSA320S Web UI not appears after PHP-Mysql package update fails
Hi! I've tried to upgrade the Php-MySql package on my NSA320S using Mijzelf's MetaRepo (thanks again, it works) because the WebUi was always naggig me. The upgrade stucked at 96%, after few hours it cannot finished, so I've restarted the nas. From this time, the Web UI's login screen appears after restart, I can login, the…
-
NAS542 pairing issue
Full functionality is obtained but one issue remains, that puzzle me: I cannot make the pairing work. Auto search as well as manual has been tested. DNS value changed to 8.8.8.8 and subsequently 8.8.4.4 With and without SMB1 Running Win 11 (latest) Any solutions out there………?
-
Nas 540 broken after power-outage
I had a power outage and after this incidend my NAS 540 kept beeping. Then i wanted to try to fix the NAS by using Mijzelf's RescueSticks (Thank you at this point for all the amazing work you are doing here). After that it didnt boot at all. On debugging with a serial connection i was able to see that i get a "Bad header…
-
Zyxel nas542 boot loop after installing OMV
Hi all, Can anybody help with a step by step guide on how to recover the original firmware? I have tried to follow the steps found on this forum on all the threads related to zyxel nas5.. boot loop. None of them worked :( The problem: I have installed OMV on a SD card and everything was fine until i wanted to expand the sd…
-
NSA 325v2 repository?
Hello! I'm trying to reach zyxel.diskstation.eu without success. Is it down? Is there a new repository? Thank you
-
NAS326 Mijzelf repo issue
Hi! I installed Mijzelf repository on my NAS326 but there are only 2 softwares to install: -Transmission -My ZYXELcloud-Agent Where are the other programs?
-
Need support for nsa310
Does anyone have the software for nsa310? Find me does not support 310. My old drive is precious and I need to find the software that gives me access like windows file explorer. Thank you.
