-
Segregate Traffic on LAN1 and LAN2
I have a USG Flex 200 with the latest firmware. I have two networks, one for home and one for work. Home network is connected to LAN1. Work network is connected to LAN2. Lately, I have been able to see devices from my home network when looking at my work network router. Although I cannot ping anything between the two…
-
NAT on Zywall USG 110
Hello, is possible on Zywall USG 110 set this? I have more subdomains routed to our public IP (we have 1) but I need from subdomain1.domain.sk 443 and subdomain2.domain.sk 443 set route, on local network, subdomain1:443 to server 1:443 and subdomain2:443 to server2:443 Is this possible to set somehow? (On apache it was…
-
L2TP VPN Client-to-Site "Wrong Base DN or Bind DN" test error
Hello everyone, I have multiple Zyxel USG Flex 100 in multiple sites and each of those has a L2TP VPN Client-to-Site configuration with AD login. They all work wonderfully, except this last one.. I configured this one as any other one but every time I test it from the AAA Server it gives me the error "Wrong Base DN or Bind…
-
How do I policy route WAN traffic for a single device through Site to Site IPSec tunnel?
I have an existing USG, site-to-site Ipsec VPN connection set up with a Remote site (subnet 192.168.3.0/24; gateway 192.168.3.1) connected to a Main site (10.2.10.0/24; gateway 10.2.10.1) Remote traffic from the LAN1 out to the WAN ordinarily goes by default through the Remote WAN interface). I have a specific device on…
-
DHCP exclusions
Is there a simple way to configure DHCP exclusions? We want to use a DHCP range from 192.168.124.0 ~ 192.168.127.253 with the following exceptions: - 192.168.124.0 ~ 192.168.124.99 - 192.168.125.0 ~ 192.168.125.99 - 192.168.126.0 ~ 192.168.126.99 - 192.168.127.0 ~ 192.168.127.99 The goal is that every IP address given by…
-
Security Policy, NO "ANY" option in drop down list.
Why is there not an 'any' option in the drop down. "any(Excluding Zywall). But I want Zywall protected also? Do I have to create 2 rules "any(Excluding)" and another "Zywall"..
-
VPN Configuration on Zyxel USG FLEX 700
I am configuring and IPSec VPN on this router and each time, I get this error in the logs. The highlighted line is where I am having the issue. That tunnel is another VPN I have configured on the router that is working for something else. I am not sure why this new VPN is trying to use that tunnel for authentication. It…
-
Translation problem "has been existed" should be "already exists."
Ran into this with a script on a USG Flex 200 running firmware V5.37(ABUI.1), but I am confident this errant translation exists elsewhere. Discovered the translation problem with this command : secure-policy6 1 name Device_Default_Allow_Service retval = -33072 ERROR: Security Policy Control name has been existed. To be…
-
Error 0x800b0109 connecting to VPNSSL
Hello, I get an error 0x800b0109 when connecting to the VPNSSL using client version 4.0.5.0 from Windows 10. The USG Flex 200 is up to date running 5.37(ABUI.1) and not showing me newer versions when checking. vcredist 2015 are installed for both x86 and x64, the helper service is running, no AV software are installed at…
-
USG20W-VPN (USG FLEX 50W) 5.37(ABAR.2) stopped turning on
Hello! Updated USG20W-VPN (USG FLEX 50W is displayed in the web interface) to version 5.37 (ABAR.2). After the update, the device rebooted and worked fine for about a week. Turned off the device. I did this as usual via the web interface. The SYS indicator has stopped lighting. I waited about 3 minutes and unplugged the…
-
USG40 - VPN Traffic VPN2Internet/VPN2LAN and back
Hi, I set up a IKE VPN with my USG40. The VPN establishing works well, but i don't get any internet or LAN access. In the Logs it looks like the traffic goes through VPN2any, but nothing comes back, but i doesn't see any block in the Log. What could cause thath error? Br
-
USG Flex 700 / VPN
Hello, I have some questions about VPN connections on a USG Flex 700, in "on premise" configuration. The USG is connected to a distant site by an IPsec tunnel with VTI configuration (and static routes). On LAN, we have some VLAN, and only one (VLAN20) must access the distant network through the tunnel. The distant servers…
-
Fehler bei L2TP VPN ATP 500
Hallo liebe Community, ich habe mit einmal das Problem, dass sich kein Windows Client mehr per VPN über L2TP verbinden kann. Er bricht ohne Fehlermeldung einfach ab. In der Log erkenne ich leider auch nicht die Ursache. könnt Ihr mir hierbei helfen? Viele Grüße Oliver Wend
-
ZyWALL USG 200 booting issues
Not able to boot my USG 200, I bought this second hand and tried to reset the device when I lost coms to it. Now I get the following when booting up: FLASH: AMD 16M CF read: device 0 not ready IDENT command error: 0xf0 IDENT command error: 0xf0 ERROR BootModule Version: V1.12 | 11/17/2009 18:05:22 DRAM: Size = 256 Mbytes…
-
Configure SecuExtender IPSec client from command line?
Hello, Are there command line switches I can use to install SecuExtender with it's license code, then import a TLG file for configuration? Thanks, -John
-
Usg200 stacked with sys led flashing
Dear, unfortunately my zyxel usg200 with 2.20 firmware stacked with sys led flashing. i’m trying to find recovery firmware for the product but without success. Could you please help me? Thank you very much
-
Logs not displaying after firmware update on ZyWall ATP200
I'm encountering an issue with one of our ZyWall ATP200 units and seeking insights or resolutions from anyone who might have experienced something similar. Three months ago, we auto-updated to the latest firmware version (5.37 ABFW.1), and since then, the logs under Monitor > Log have ceased to update on this specific…
-
ZyWALL USG 20W - failed attempt to upload the software
After an unsuccessful attempt to upload the software, you cannot connect to the router. Is there a detailed, step-by-step instruction somewhere (with the necessary files) on how to re-upload the firmware? Some kind of recovery tutorial.
-
second question regarding the Zyxel SCR 50AXE
hi, I may be actually thinking of getting this security router: Zyxel SCR 50AXE the price looks good respect to the zyxel usg flex 100. my question is this I want to put the Zyxel SCR 50AXE between my ISP router and MY router like this: ISP ROUTER → Zyxel SCR 50AXE → MY ROUTER → SWITCH will the Zyxel SCR 50AXE be able to…
-
ATP200 issue - Trafic blocked
Hi, I have an issue with ATP200, this firewall blocks mostly all the trafic even I don't have any active security rules activated. I didn't touch any rules, it was working fine before and since a couple of days I have these in my logs : 2024-02-20 16:24:11Security policy192.168.1.14856671216.239.32.117443Rule…
